Toggle Main Menu Toggle Search

Open Access padlockePrints

Browsing publications by Professor Alan Jack.

Newcastle AuthorsTitleYearFull text
Bogi Jensen
Professor Alan Jack
Dr Glynn Atkinson
Professor Barrie Mecrow
Performance of a Folded-Strip Toroidally Wound Induction Machine2012
Jamie Washington
Dr Glynn Atkinson
Dr Nick Baker
Professor Alan Jack
Professor Barrie Mecrow
et al.
Three-Phase Modulated Pole Machine Topologies Utilizing Mutual Flux Paths2012
Jamie Washington
Glynn Atkinson
Dr Nick Baker
Professor Alan Jack
Professor Barrie Mecrow
et al.
Three-Phase Modulated Pole Machine Topologies Utilizing Mutual Flux Paths2012
Dr Glynn Atkinson
Professor Alan Jack
On the modeling of a TFPM by reluctance network including the saturation effect with emphasis on the leakage fluxes2011
Dr John Bennett
Professor Barrie Mecrow
Professor Alan Jack
Dr Dave Atkinson
A Prototype Electrical Actuator for Aircraft Flaps2010
Professor Barrie Mecrow
John Bennett
Professor Alan Jack
Dr Dave Atkinson
Drive topologies for solar-powered aircraft2010
Dr Glynn Atkinson
Dr John Bennett
Professor Barrie Mecrow
Dr Dave Atkinson
Professor Alan Jack
et al.
Fault tolerant drives for aerospace applications2010
Dr Glynn Atkinson
Professor Alan Jack
Flux Concentration at Pole Pieces2010
Professor Alan Jack
Dr Glynn Atkinson
Rotor for modulated pole machine2010
Daniel Smith
Professor Barrie Mecrow
Dr Glynn Atkinson
Professor Alan Jack
Ali Mehna
et al.
Shear stress concentrations in permanent magnet rotor sleeves2010
Bogi Jensen
Professor Alan Jack
Toroidally wound induction machines2010
Professor Alan Jack
Professor Barrie Mecrow
Dr Glynn Atkinson
Current Developments in Soft Magnetic Composites for Electromagnetic Actuators2009
Dr Glynn Atkinson
Professor Alan Jack
Investigation of the Leakage Fluxes of SMC Made Magnetic Circuit Claw Pole TFPMs2009
Dr Glynn Atkinson
Professor Alan Jack
Professor Barrie Mecrow
Multi-Phase Stator Device (Combined Phases)2009
Dr Glynn Atkinson
Professor Alan Jack
Professor Barrie Mecrow
Multi-Phase Stator Device (Combined Phases) HB-7072009
Dr Glynn Atkinson
Professor Alan Jack
Bogi Jensen
Soft magnetic composite in optimised machine design2009
Professor Barrie Mecrow
Professor Alan Jack
Efficiency trends in electric machines and drives2008
Dr Glynn Atkinson
Professor Alan Jack
Flux Concentration at Rotor Pole Pieces2008
Dr George Kotsikos
Dr Jack Hale
Professor Alan Jack
Professor Geoff Gibson
Mechanical and electrical engineering aspects of long-distance underground power transmission2008
Dr Glynn Atkinson
Professor Alan Jack
Permanent magnet rotor with flux concentrating polar pieces2008
Robert Argile
Professor Barrie Mecrow
Dr Dave Atkinson
Professor Alan Jack
Reliability analysis of fault tolerant drive topologies2008
Robert Argile
Professor Barrie Mecrow
Dr Dave Atkinson
Professor Alan Jack
Reliability Analysis of Fault Tolerant Motor Topologies2008
Professor Barrie Mecrow
John Bennett
Professor Alan Jack
Dr Dave Atkinson
Very High Efficiency Drives for Solar Powered Unmanned Aircraft2008
Professor Alan Jack
Electrical Technology for Automotive Applications2007
Andrew Causebrook
Dr Dave Atkinson
Professor Alan Jack
Fault ride-through of large wind farms using series dynamic braking resistors (March 2007)2007
Zaid Al-Otaibi
Professor Alan Jack
Spiral flexure springs in single phase linear-resonant motors2007
Zaid Al-Otaibi
Professor Alan Jack
Spiral flexure springs in single phase linear-resonant motors2007
Professor Alan Jack
Advances in Machine Topologies and Construction Methods2006
Dr Glynn Atkinson
Professor Alan Jack
Development of Somaloy Components for a BLDC Motor in a Scroll Compressor Application2006
Andrew Causebrook
Dr Dave Atkinson
Professor Alan Jack
Fault ride-through: Shifting the balance of power from blade pitch to electrical resistance2006
Mark Leaver
Professor Barrie Mecrow
Professor Alan Jack
Dr Andrew Steven
Katie Austin
et al.
High-Speed Drives for Mass Market Products2006
Professor Alan Jack
Loss calculations for soft magnetic composites2006
Zaid Al-Otaibi
Professor Alan Jack
On the design of oscillating linear single phase permanent magnet motors2006
Zaid Al-Otaibi
Professor Alan Jack
On the design of oscillating linear single phase permanent magnet motors2006
Ulrike Hoefer
Professor Alan Jack
Predicting and Preventing Demagnetisation in Permanent Magnet Motor Drives2006
Manas Khatre
Professor Alan Jack
Simulation of PMSM VSI drive for determination of the size limits of the dc-link capacitor of aircraft control surface actuator drives2006
Dr Glynn Atkinson
Professor Barrie Mecrow
Professor Alan Jack
Dr Dave Atkinson
The analysis of losses in high-power fault-tolerant machines for aerospace applications2006
Dr Glynn Atkinson
Professor Barrie Mecrow
Professor Alan Jack
Dr Dave Atkinson
The Design of Fault Tolerant Machines for Aerospace Applications2005
Dr John Bennett
Professor Barrie Mecrow
Professor Alan Jack
Dr Dave Atkinson
A prototype electrical actuator for aircraft flaps and slats2005
Professor Alan Jack
Professor Barrie Mecrow
Phillip Dickinson
Axial Flux Motors Using Compacted Insulated Iron Powder and Laminations - Design and Test Results2005
Professor Alan Jack
Professor Barrie Mecrow
Axial flux motors using compacted insulated iron powder and laminations -design and test results2005
Dr Hendrik Polinder
Professor Barrie Mecrow
Professor Alan Jack
Phillip Dickinson
Conventional and TFPM linear generators for direct-drive wave energy conversion2005
Ross Hall
Professor Alan Jack
Professor Barrie Mecrow
Design and initial testing of an outer rotating segmented rotor switched reluctance machine for an aero-engine shaft-line-embedded starter/generator2005
Professor Alan Jack
Design Concepts for Electric Motors using Soft Magnetic Composites2005
Dr Dave Atkinson
Professor Alan Jack
Dr Matthew Armstrong
Development of a high bandwidth multi-phase multilevel power supply for electricity supply network emulation2005
Graham Pannell
Dr Dave Atkinson
Professor Alan Jack
Dynamic model of DFIG control performance under fault conditions for offshore wind applications2005
Professor Barrie Mecrow
Professor Alan Jack
Efficiency trends in electric machines and drives2005
Dr Matthew Armstrong
Dr Dave Atkinson
Professor Alan Jack
Stephen Turner
Power system emulation using a real time, 145kW, virtual power system2005
Professor Alan Jack
Soft Magnetic Composites – Motor Design Issues and Applications2005
Dr Glynn Atkinson
Professor Barrie Mecrow
Professor Alan Jack
Dr Dave Atkinson
The design of fault tolerant machines for aerospace applications2005
Dr Matthew Armstrong
Dr Dave Atkinson
Professor Alan Jack
Stephen Turner
Unique virtual power system technology used in a low power network to provide solution testing for distributed generation2005
Dr Matthew Armstrong
Dr Dave Atkinson
Professor Alan Jack
Stephen Turner
Unique virtual power system technology used in a low power network to provide solution testing for distributed generation2005
Professor Alan Jack
18th Ewing Lecture: Advances in Electric Machines: Topology, Materials and Construction2004
Dr John Bennett
Professor Barrie Mecrow
Professor Alan Jack
Dr Dave Atkinson
Choice of drive topologies for electrical actuation of aircraft flaps and slats2004
Dr John Bennett
Professor Barrie Mecrow
Professor Alan Jack
Dr Dave Atkinson
Choice of drive topologies for electrical actuation of aircraft flaps and slats2004
Professor Barrie Mecrow
Professor Alan Jack
Dr Dave Atkinson
Simon Green
Dr Glynn Atkinson
et al.
Design and testing of a four-phase fault-tolerant permanent-magnet machine for an engine fuel pump2004
Dr Ian Gilbert
Professor Steve Bull
Professor Alan Jack
Dawn Stephenson
Dr Alten De Sa
et al.
Effects of processing upon the properties of soft magnetic composites for low loss applications2004
Professor Barrie Mecrow
Professor Alan Jack
Elektrische Maschine2004
Dr John Bennett
Professor Alan Jack
Professor Barrie Mecrow
Dr Dave Atkinson
Fault-tolerant control architecture for an electrical actuator2004
Dr John Bennett
Professor Alan Jack
Professor Barrie Mecrow
Dr Dave Atkinson
Fault-tolerant control architecture for an electrical actuator2004
Dr John Bennett
Professor Alan Jack
Fault-tolerant control architecture for an electrical actuator2004
Professor Alan Jack
Loss calculations for soft magnetic composites2004
Professor Alan Jack
Professor Barrie Mecrow
Low cost SMC brushless DC motors for high volume applications in the automotive sector2004
Professor Barrie Mecrow
Eyhab El-Kharashi
Emeritus Professor John Finch
Professor Alan Jack
Preliminary performance evaluation of switched reluctance motors with segmental rotors2004
Professor Barrie Mecrow
Professor Alan Jack
Ulrike Hoefer
Phillip Dickinson
Simplifying the manufacturing process for electrical machines2004
Professor Alan Jack
Soft magnetic composites - motor design issues and applications2004
Professor Alan Jack
Soft Magnetic Composites and their Use in Electrical Machines2004
Professor Alan Jack
Phillip Dickinson
Stator core for linear motor2004
Professor Alan Jack
Stator of an electrical machine2004
Professor Barrie Mecrow
Professor Alan Jack
Dr Dave Atkinson
Brian Green
The influence of stator design on the performance of fault tolerant machines2004
Professor Barrie Mecrow
Professor Alan Jack
Dr Dave Atkinson
Simon Green
Glynn Atkinson
et al.
Design and testing of a 4 phase fault tolerant permanent magnet machine for an engine fuel pump2003
Simon Green
Dr Dave Atkinson
Professor Barrie Mecrow
Professor Alan Jack
Brian Green
et al.
Fault tolerant, variable frequency, unity power factor converters for safety critical PM drives2003
Dr Hendrik Polinder
Professor Barrie Mecrow
Professor Alan Jack
Phillip Dickinson
Linear generators for direct-drive wave energy conversion2003
Professor Barrie Mecrow
Eyhab El-Kharashi
Emeritus Professor John Finch
Professor Alan Jack
Performance evaluation of switched reluctance motors with segmental rotors2003
Professor Alan Jack
Recent Developments in Motors and Drives for Domestic Applications2003
Professor Barrie Mecrow
Eyhab El-Kharashi
Emeritus Professor John Finch
Professor Alan Jack
Segmental rotor switched reluctance motors with single-tooth windings2003
Dr Dave Atkinson
Professor Alan Jack
Professor Barrie Mecrow
Sensorless operation of a fault tolerant PM drive2003
Professor Alan Jack
Soft magnetic composites-materials and applications2003
Professor Alan Jack
The SMC Technology – from idea to reality2003
Professor Alan Jack
Professor Barrie Mecrow
Alternate designs of low cost brushless-DC motors using soft magnetic composites2002
Dr Ian Gilbert
Professor Steve Bull
Emeritus Professor Terry Evans
Professor Alan Jack
Development of soft magnetic composites for low-loss applications2002
Dr Dave Atkinson
Dr Chris French
Professor Alan Jack
Electrical Power Test Facilities for the New and Renewable Energy Centre2002
Professor Barrie Mecrow
Professor Alan Jack
Dr Dave Atkinson
Phillip Dickinson
High torque machines for power hand tool applications2002
Professor Barrie Mecrow
Professor Alan Jack
Dr Dave Atkinson
Phillip Dickinson
High torque machines for power hand tool applications2002
Phillip Dickinson
Professor Alan Jack
Professor Barrie Mecrow
Improved permanent magnet machines with claw pole armatures2002
Professor Alan Jack
Magnetic Assessment of SMC materials2002
Professor Barrie Mecrow
Emeritus Professor John Finch
Eyhab El-Kharashi
Professor Alan Jack
Switched reluctance motors with segmental rotors2002
Professor Barrie Mecrow
Emeritus Professor John Finch
Eyhab El-Kharashi
Professor Alan Jack
The design of switched reluctance motors with segmental rotors2002
Professor Alan Jack
The SMC Technology – from concept to reality2002
Professor Alan Jack
Professor Barrie Mecrow
Phillip Dickinson
A stator for an electrical machine2001
Professor Alan Jack
Iron powder in electrical machines, possibilities and limitations2001
Professor Alan Jack
Iron Powder in Electrical Machines, Possibilities and Limitations2001
Professor Barrie Mecrow
Professor Alan Jack
Power Tool2001
Professor Paul Acarnley
Professor Alan Jack
Professor Barrie Mecrow
Starting of single-phase cageless synchronous motors2001
Professor Alan Jack
Professor Barrie Mecrow
Design and testing of a universal motor using a soft magnetic composite stator2000
Professor Alan Jack
Professor Barrie Mecrow
Phillip Dickinson
Dawn Stephenson
Permanent-magnet machines with powdered iron cores and prepressed windings2000
Professor Alan Jack
Professor Barrie Mecrow
Christian Weiner
Switched reluctance and permanent magnet motors suitable for vehicle drives - A comparison2000
Professor Larbi Refoufi
Professor Alan Jack
Analysis and modeling of the steady state behavior of the static Kramer induction generator1999
Professor Alan Jack
Professor Barrie Mecrow
Christopher Maddison
Combined radial and axial permanent magnet motors using soft magnetic composites1999
Professor Barrie Mecrow
Professor Alan Jack
Dr Dave Atkinson
Operation of fault tolerant machines with winding failures1999
Professor Alan Jack
Professor Barrie Mecrow
Phillip Dickinson
Dawn Stephenson
Emeritus Professor James Burdess
et al.
Permanent magnet machines with powdered iron cores and pre-pressed windings1999
Dr Dave Atkinson
Professor Alan Jack
Real-time emulation for power equipment development. Part 2: The virtual machine1998