Browse by author
Lookup NU author(s): Dr Ignazio Maria Viola, Matthieu Riotte
Full text for this publication is not currently held within this repository. Alternative links are provided below where available.
The aerodynamics of a sailing yacht with different sail trims are presented, derived from simulations performed using computational fluid dynamics. A Reynolds-averaged Navier–Stokes approach was used to model sixteen sail trims first tested in a wind tunnel, where the pressure distributions on the sails were measured. An original approach was employed by using two successive simulations: the first one on a large domain to model the blockage due to the wind tunnel walls and the sails model, and a second one on a smaller domain to model the flow around the sails model. A verification and validation of the computed aerodynamic forces and pressure distributions was performed. The computed pressure distribution is shown to agree well with the measured pressures. The sail surface pressure was correlated with the increase of turbulent viscosity in the laminar separation bubble, the flow reattachment and the trailing edge separation. The drive force distribution on both sails showed that the fore part of the genoa (fore sail) provides the majority of the drive force and that the effect of the aft sail is mostly to produce an upwash effect on the genoa. An aerodynamic model based on potential flow theory and a viscous correction is proposed. This model, with one free parameter to be determined, is shown to fit the results better than the usual form drag and induced drag only, even if no friction drag is explicitly considered.
Author(s): Viola IM, Bot P, Riotte M
Publication type: Article
Publication status: Published
Journal: International Journal of Heat and Fluid Flow
Year: 2013
Volume: 39
Pages: 90-101
Print publication date: 01/02/2013
ISSN (print): 0142-727X
ISSN (electronic): 1879-2278
Publisher: Elsevier
URL: http://dx.doi.org/10.1016/j.ijheatfluidflow.2012.10.004
DOI: 10.1016/j.ijheatfluidflow.2012.10.004
Altmetrics provided by Altmetric
