Browse by author
Lookup NU author(s): Octavio ALBORES-SILVA,
Dr Alasdair Charles
Full text for this publication is not currently held within this repository. Alternative links are provided below where available.
The susceptibility of stainless steel 316L (UNS S31603) to atmospheric induced stress corrosion cracking in conditions representative of the exposure to marine aerosols has been studied through laboratory tests on U-bend specimens. This study was performed to evaluate the durability of containers for the storage and disposal of intermediate-level radioactive waste during prolonged periods of exposure to atmospheric conditions in surface facilities. The results, however, are likely to be relevant to stainless steel components exposed to marine aerosols in cold and warm climates, particularly indoors (no direct solar irradiation). Tests were performed at constant tensile stress in the presence of MgCl2, used to simulate seawater. Different temperature (i.e., room temperature of 50 degrees C), relative humidity (about 30 and 60%) and chloride deposition density (10 mu g cm(-2) to > 10,000 mu g cm(-2)) were tested. The results show that atmospheric induced stress corrosion cracking tended to be significantly enhanced at higher temperatures and at relative humidity (RH) close to the deliquescence point of the salt (similar to 30%), with cracks deep than 100 mu m developing at a deposition density greater than 100 mu g cm(-2). However, at room temperature or in conditions of higher relative humidity (60%), much higher deposition densities were required to observe any cracks.
Author(s): Padovani C, Albores-Silva OE, Charles EA
Publication type: Article
Publication status: Published
Print publication date: 01/03/2015
Online publication date: 07/11/2014
Acceptance date: 27/10/2014
Date deposited: 21/12/2015
ISSN (print): 0010-9312
ISSN (electronic): 1938-159X
Publisher: NACE International (National Association of Corrosion Engineers)
Altmetrics provided by Altmetric