Browse by author
Lookup NU author(s): Dr Steven Tay
Full text for this publication is not currently held within this repository. Alternative links are provided below where available.
© 2023 Elsevier Ltd. Passive enhancement techniques have been widely adopted in thermal energy storage applications such as the phase change material (PCM) based latent heat energy storage systems to improve the thermal performance of these systems with minimal complexities. Recent studies have shown high interest in investigating the effect of different system orientations as a passive technique to improve the performance of thermal energy storage systems. This paper, thus, seeks to fill the research void in developing a numerical model that can be applied to assess the thermal effectiveness of the vertical and horizontal LHESS as a heat exchanger in addition to the melting dynamics of the PCM. This paper discusses a detailed numerical investigation using Computational Fluid Dynamics (CFD) simulation that was developed based on an experimental study. This paper displayed the numerical validation of the temperature profiles and heat exchanger effectiveness of both vertical and horizontal LHESS with insight into behaviour of the phase change material within the systems. The simulation results displayed the trends of the temperature profile and effectiveness were well captured against the experimental study. The numerical model displayed that the horizontal LHESS was more thermally effective than the vertical LHESS which was attributed to its superior free convective heat transfer behaviour and transient supply temperature of the heat transfer fluid. The horizontal LHESS reduced the PCM melting duration by 23 %, 13.3 %, and 33.3 % in comparison to the vertical LHESS for the HTF flow rates of 1.4, 0.7, and 0.35 l/min, respectively. It was observed that at all HTF flow rates, the rate of melting at the horizontal LHESS slowed down after approximately 85 % of the PCM have been melted which was caused by the absence of natural convection, resulting in the remaining PCM to melt mainly by conduction.
Author(s): Panisilvam J, Wang PC, Tay NHS
Publication type: Article
Publication status: Published
Journal: Journal of Energy Storage
Year: 2023
Volume: 72
Print publication date: 20/11/2023
Online publication date: 15/07/2023
Acceptance date: 01/07/2023
ISSN (print): 2352-152X
ISSN (electronic): 2352-1538
Publisher: Elsevier Ltd
URL: https://doi.org/10.1016/j.est.2023.108267
DOI: 10.1016/j.est.2023.108267
Altmetrics provided by Altmetric
