ePrints

Phase Commutation Optimized Control for Linear-Rotary Switched Reluctance Motor

Lookup NU author(s): Dr Xu DengORCiD

Downloads

Full text for this publication is not currently held within this repository. Alternative links are provided below where available.

Abstract

IEEEThe traditional DTC method directly controls the torque and flux linkage without model calculation, which is beneficial to restraining torque ripples. However, the LRSRM not only provides the torque required for rotary motion, but also provides the axial force required for linear motion. Hence, the winding usually works in two-phase excitation mode. Given the different torque output capabilities of the front and rear phases under different rotor position angles, the conduction angles of the adjacent two phases can be further optimized. In this paper, a phase commutation optimized method is proposed to improve the torque generation between two neighboring phases and reduce torque ripple. Firstly, the hysteresis-loop control of the flux linkage is removed, which can reduce the calculation burden of digital controller. Secondly, the sector division and voltage vector selection without flux hysteresis control are redesigned. Experimental results verify the effectiveness of the proposed method. The phase current in negative torque region is reduced, and the torque ripple is suppressed as well.

Publication metadata

Author(s): Meng X, Cao X, Shi R, Deng X, Deng Z

Publication type: Article

Publication status: Published

Journal: IEEE Transactions on Energy Conversion

Year: 2024

Pages: epub ahead of print

Online publication date: 02/07/2024

Acceptance date: 27/06/2024

ISSN (print): 0885-8969

ISSN (electronic): 1558-0059

Publisher: Institute of Electrical and Electronics Engineers Inc.

URL: https://doi.org/10.1109/TEC.2024.3421534

DOI: 10.1109/TEC.2024.3421534

Altmetrics

Share