Browse by author
Lookup NU author(s): Emeritus Professor Derek Thompson
Full text for this publication is not currently held within this repository. Alternative links are provided below where available.
Nicalon SiC fibres were heat-treated in various atmospheres and at various pressures. Initially CO, nitrogen and air were used as the heat-treatment environment at one atmosphere pressure. Microstructural changes and any related strength degradation or improvement were measured for the heat-treated fibres. After heat-treatment in the temperature range 1000°C-1600°C, each sample showed different weight changes. Thus, in air, a weight gain was observed with increasing temperature, whereas in CO and N2, weight losses were observed but with a smaller weight loss observed for CO. Moreover, carbon monoxide had a significant effect on the strength retention of the fibres. Since the lowest weight loss was observed after heat-treatment in CO at one atmosphere, high pressure CO gas was used to heat-treat Nicalon fibres between 1000°C and 1700°C and the resulting fibres were analysed by single-filament strength testing, scanning electron microscopy, and X-ray diffraction. The results were completely different compared with those in one atmosphere of CO. As the temperature increased, weight and strength increased whereas at one atmosphere pressure, both weight and strength had decreased. The weight increase was because of surface reaction between the CO atmosphere and the SiC fibre and/or because of deposition of carbon from the pressurised CO gas, giving the fibre a surface carbon coating. Carbon coating of a fibre is a beneficial property for CMCs since it provides a weak interface which facilitates pull-out during fracture. © 2001 Kluwer Academic Publishers.
Author(s): Thompson DP; Demir A
Publication type: Article
Publication status: Published
Journal: Journal of Materials Science
Year: 2001
Volume: 36
Issue: 12
Pages: 2931-2935
ISSN (print): 0022-2461
ISSN (electronic): 1573-4803
Publisher: Springer
URL: http://dx.doi.org/10.1023/A:1017906604748
DOI: 10.1023/A:1017906604748
Altmetrics provided by Altmetric
