Toggle Main Menu Toggle Search

Open Access padlockePrints

Printed dipole array for MIMO wireless networks

Lookup NU author(s): Evangelos Michailidis, Professor Harris Tsimenidis, Dr Graeme Chester

Downloads

Full text for this publication is not currently held within this repository. Alternative links are provided below where available.


Abstract

In this article we present a linear printed dipole array of two radiating elements for potential use in IEEE 802.11n wireless local area networks. The dipoles are fed through a microstrip balun and are oriented in a fashion that introduces pattern diversity. Advantages of the proposed design are low cost, ease of fabrication and high impedance bandwidth. Mutual coupling between antenna elements is below 20dB for the measured frequency range (2-6.6 GHz). The measured impedance bandwidth is 29.3 percent (699 MHz) at the lower band and 26.41 percent (1.483 GHz) at. the upper band. The array was constructed on Duroid 5870 and the measured S parameters and radiation pattern were found to be in agreement with theory and simulations. The spatial correlation is computed from the measured S parameters and the theoretical capacity is evaluated based on Monte Carlo realisations of the channel and the signal correlation amongst radiating elements. © 2007 IEEE.


Publication metadata

Author(s): Michailidis E, Tsimenidis C, Chester G

Publication type: Conference Proceedings (inc. Abstract)

Publication status: Published

Conference Name: Loughborough Antennas and Propagation Conference

Year of Conference: 2007

Pages: 117-120

Publisher: IEEE

URL: http://dx.doi.org/10.1109/LAPC.2007.367445

DOI: 10.1109/LAPC.2007.367445

Library holdings: Search Newcastle University Library for this item

ISBN: 1424407761


Share