Toggle Main Menu Toggle Search

Open Access padlockePrints

Browsing publications by Professor Mohamed Mamlouk.

Newcastle AuthorsTitleYearFull text
Dr Rambabu Gutru
Professor Mohamed Mamlouk
Insights into the electrocatalytic behavior of nitrogen and sulfur co-doped carbon nanotubes toward oxygen reduction reaction in alkaline media2022
Hosni Ahmed Elwan Atout
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
A review of proton exchange membranes based on protic ionic liquid/polymer blends for polymer electrolyte membrane fuel cells2021
Steve Ward
Dr Gaurav Gupta
Professor Mohamed Mamlouk
Dr Stevin Pramana
Boosting the oxygen evolution activity in non-stoichiometric praseodymium ferrite-based perovskites by A site substitution for alkaline electrolyser anodes2021
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
Gel-Polymer Electrolytes Based on Poly(Ionic Liquid)/Ionic Liquid Networks2021
Zhiming Feng
Dr Pilar Esteban
Dr Gaurav Gupta
Dr David Fulton
Professor Mohamed Mamlouk
et al.
Highly conductive partially cross-linked poly(2,6-dimethyl-1,4-phenylene oxide) as anion exchange membrane and ionomer for water electrolysis2021
Joshua Saczek
Dr Vladimir Zivkovic
Professor Mohamed Mamlouk
Dr Stevin Pramana
Long-Lived Liquid Marbles for Green Applications2021
Dr David Perry
Professor Mohamed Mamlouk
Probing mass transport processes in Li-ion batteries using electrochemical impedance spectroscopy2021
Dr Ravikumar Ravikumar
Emeritus Professor Keith Scott
Professor Mohamed Mamlouk
A diethyl methyl ammonium triflate based protic ionic liquid polymer membrane for intermediate temperature water electrolysis2020
Professor Mohamed Mamlouk
Chapter 6: Alkaline Anionic Exchange Membrane Water Electrolysers2020
Dr Ravikumar Ravikumar
Emeritus Professor Keith Scott
Professor Mohamed Mamlouk
Diethylmethylammonium trifluoromethanesulfonate protic ionic liquid electrolytes for water electrolysis2020
Professor Mohamed Mamlouk
Professor Nilanjan Chakraborty
Entropy generation analysis based on a three-dimensional agglomerate model of an anion exchange membrane fuel cell2020
Dr Deepashree Thumbarathy
Dr Gaurav Gupta
Professor Mohamed Mamlouk
Dr Prodip Das
Fabrication and Characterization of Tuneable Flow-Channel/Gas-Diffusion-Layer Interface for Polymer Electrolyte Fuel Cells2020
Rose Anne Acedera
Dr Gaurav Gupta
Professor Mohamed Mamlouk
Solution combustion synthesis of porous Co3O4 nanoparticles as oxygen evolution reaction (OER) electrocatalysts in alkaline medium2020
Dr Gaurav Gupta
Professor Mohamed Mamlouk
The Effects of Morphology, Microstructure and Mixed-valent States of MnO2 on the Oxygen Evolution Reaction Activity in Alkaline Anion Exchange Membrane Water Electrolysis2020
Douglas Stewart
Emeritus Professor Keith Scott
Professor Mohamed Mamlouk
The Role of Tungsten Oxide in Enhancing the Carbon Monoxide Tolerance of Platinum-Based Hydrogen Oxidation Catalysts2020
Dr Khalid Zakaria
Dr Maksudul Hasan
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
Direct Glycerol Fuel Cells: Comparison with Direct Methanol and Ethanol Fuel Cells2019
Professor Elizabeth Gibson
Professor Mohamed Mamlouk
Brett Cherry
How materials science will underpin the future energy network2019
Bruno De Souza Machado
Professor Nilanjan Chakraborty
Professor Mohamed Mamlouk
Dr Prodip Das
A Three-dimensional Agglomerate Model of an Anion Exchange Membrane Fuel Cell2018
Richard Espiritu
Professor Bernard Golding
Emeritus Professor Keith Scott
Professor Mohamed Mamlouk
Degradation of radiation grafted anion exchange membranes tethered with different amine functional groups via removal of vinylbenzyl trimethylammonium hydroxide2018
George Zafeiropoulos
Professor Mohamed Mamlouk
Porous titania photoelectrodes built on a Ti-web of microfibers for polymeric electrolyte membrane photoelectrochemical (PEM-PEC) cell applications2018
Dr Gaurav Gupta
Emeritus Professor Keith Scott
Professor Mohamed Mamlouk
Soluble Polystyrene‐b‐poly (ethylene/butylene)‐b‐polystyrene Based Ionomer for Anion Exchange Membrane Fuel Cells Operating at 70 °C2018
Bruno De Souza Machado
Professor Mohamed Mamlouk
Professor Nilanjan Chakraborty
Three-dimensional Agglomerate Model of an Anion Exchange Membrane Fuel Cell using air at the cathode - A parametric study2018
Richard Espiritu
Emeritus Professor Keith Scott
Professor Mohamed Mamlouk
Degradation of radiation grafted hydroxide anion exchange membraneimmersed in neutral pH: removal of vinylbenzyl trimethylammonium hydroxidedue to oxidation2017
Dr Gaurav Gupta
Emeritus Professor Keith Scott
Professor Mohamed Mamlouk
Performance of polyethylene based radiation grafted anion exchange membrane with polystyrene-b-poly (ethylene/butylene)-b-polystyrene based ionomer using NiCo2O4 catalyst for water electrolysis2017
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
Anode partial flooding modelling of Proton Exchange Membrane Fuel Cells: Model development and validation2016
Richard Espiritu
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
Study on the effect of the degree of grafting on the performance of polyethylene-based anion exchange membrane for fuel cell application2016
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
A boron phosphate-phosphoric acid composite membrane for medium temperature proton exchange membrane fuel cells2015
Lei Xing
Dr Prodip Das
Dr Xueguan Song
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
et al.
Numerical Analysis of the Optimum Membrane/Ionomer Water Content of PEMFCs: The Interaction of Nafion Ionomer Content and Cathode Relative Humidity2015
Lei Xing
Dr Terrence Liu
Taiwo Alaje
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
et al.
A two-phase flow and non-isothermal agglomerate model for a proton exchange membrane (PEM) fuel cell2014
Dr Aurelia-Anca Dumitru
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
Effect of different chemical modification of carbon nanotubes for the oxygen reduction reaction in alkaline media2014
Lei Xing
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
Numerical investigation of the optimal Nafion® ionomer content in cathode catalyst layer: An agglomerate two-phase flow modelling2014
Vinod Puthiyapura
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
Physical and electrochemical evaluation of ATO supported IrO2 catalyst for proton exchange membrane water electrolyser2014
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
Preparation and characterization of polybenzimidzaole/diethylamine hydrogen sulphate for medium temperature proton exchange membrane fuel cells2014
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
Sulfonated polyether ether ketone - sulfonated graphene oxide composite membranes for polymer electrolyte fuel cells2014
Emeritus Professor Keith Scott
Stephen Pilditch
Professor Mohamed Mamlouk
A Model of a High-Temperature Direct Methanol Fuel Cell2013
Lei Xing
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
A parametric study of the cathode catalystlayer composition based on a two-dimensional two-phase flow agglomerate model2013
Lei Xing
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
A two dimensional agglomerate model for a proton exchange membrane fuel cell2013
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
Comparison of high-temperature and low-temperature polymer electrolyte membrane fuel cell systems with glycerol reforming process for stationary applications2013
Emeritus Professor Keith Scott
Professor Mohamed Mamlouk
Richard Espiritu
Professor Xiaoming Wu
Progress in alkaline membrane fuel cells and electrolysers2013
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
Effect of anion functional groups on the conductivity and performance of anion exchange polymer membrane fuel cells2012
Professor Mohamed Mamlouk
Dr Jong Jang
Emeritus Professor Keith Scott
Intermediate Temperature Fuel Cell and Oxygen Reduction Studies With Carbon-Supported Platinum Alloy Catalysts in Phosphoric Acid Based Systems2012
Professor Mohamed Mamlouk
Maximizing the Efficiency of a HT-PEMFC System Integrated with Glycerol Reformer2012
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
Radiation grafted membranes for superior anion exchange polymer membrane fuel cells performance2012
Tiago Sousa
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
Three Dimensional Model of a High Temperature PEMFC. Study of the Flow Field Effect on Performance2012
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
A Graphite Oxide Paper Polymer Electrolyte for Direct Methanol Fuel Cells2011
Professor Mohamed Mamlouk
Tiago Sousa
Emeritus Professor Keith Scott
A High Temperature Polymer Electrolyte Membrane Fuel Cell Model for Reformate Gas2011
Dr Xu Wu
Emeritus Professor Keith Scott
Professor Mohamed Mamlouk
A PBI-Sb0.2Sn0.8P2O7-H3PO4 Composite Membrane for Intermediate Temperature Fuel Cells2011
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
A study of oxygen reduction on carbon-supported platinum fuel cell electrocatalysts in polybenzimidazole/phosphoric acid2011
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
An Investigation of Palladium Oxygen Reduction Catalysts for the Direct Methanol Fuel Cell.2011
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
An investigation of Pt alloy oxygen reduction catalysts in phosphoric acid doped PBI fuel cells2011
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
Analysis of high temperature polymer electrolyte membrane fuel cell electrodes using electrochemical impedance spectroscopy2011
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
Characterization and application of anion exchange polymer membranes with non-platinum group metals for fuel cells2011
Dr Xu Wu
Xu Wang
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
Composite membranes of polybenzimidazole and caesium-salts-of-heteropolyacids for intermediate temperature fuel cells2011
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
Electrochemical and fuel cell evaluation of Co based catalyst for oxygen reduction in anion exchange polymer membrane fuel cells2011
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
Nur Hidayati
High Temperature Direct Methanol Fuel Cell Based on Phosphoric Acid PBI Membrane2011
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
Mass Transport Characteristics of Cathodes in a Phosphoric Acid Polybenzimidazole Membrane Fuel Cell2011
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
Phosphoric acid-doped electrodes for a PBI polymer membrane fuel cell2011
Claudio Alvarez Gonzalez
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
Preparation and characterisation of carbon-supported palladium nanoparticles for oxygen reduction in low temperature PEM fuel cells2011
Xu Wang
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
Preparation of alkaline anion exchange polymer membrane from methylated melamine grafted poly(vinylbenzyl chloride) and its fuel cell performance2011
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
The effect of electrode parameters on the performance of anion exchange polymer membrane fuel cells2011
Tiago Sousa
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
A dynamic non-isothermal model of a laboratory intermediate temperature fuel cell using PBI doped phosphoric acid membranes2010
Tiago Sousa
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
A Non-isothermal Model of a Laboratory Intermediate Temperature Fuel Cell Using PBI Doped Phosphoric Acid Membranes2010
Tiago Sousa
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
An isothermal model of a laboratory intermediate temperature fuel cell using PBI doped phosphoric acid membranes2010
Professor Mohamed Mamlouk
Emeritus Professor Keith Scott
The effect of electrode parameters on performance of a phosphoric acid-doped PBI membrane fuel cell2010
Emeritus Professor Keith Scott
Professor Mohamed Mamlouk
A cell voltage equation for an intermediate temperature proton exchange membrane fuel cell2009
Emeritus Professor Keith Scott
Stephen Pilditch
Professor Mohamed Mamlouk
Modelling and experimental validation of a high temperature polymer electrolyte fuel cell2007
Emeritus Professor Keith Scott
Professor Mohamed Mamlouk
High temperature polymer electrolyte membrane fuel cell2006