Dr Ming Tham
| Development of an Undergraduate Control Engineering Design Project: PID Control of Blood Glucose Levels in Type 1 Diabetes Mellitus Subjects | 2018 |
|
Dr Ming Tham Professor Katarina Novakovic
| Intelligent Chitosan-polyvinylpyrrolidone Hydrogels for Mechanoresponsive Cell Proliferation and Differentiation | 2015 |
|
Dena Ghiasy Dr Ming Tham Professor Kamelia Boodhoo
| Control of a Spinning Disc Reactor: An Experimental Study | 2013 |
|
Dena Ghiasy Dr Ming Tham Professor Kamelia Boodhoo
| Control Strategies for the Spinning Disk Reactor | 2013 |
|
Dena Ghiasy Professor Kamelia Boodhoo Dr Ming Tham
| Control of Intensified Equipment: A simulation study for pH Control in a Spinning Disc Reactor | 2012 |
|
Dena Ghiasy Professor Kamelia Boodhoo Dr Ming Tham
| Thermographic analysis of thin liquid flims on a rotating disc: approach and challenges | 2012 |
|
Dena Ghiasy Professor Kamelia Boodhoo Dr Ming Tham
| Control of Process Intensified Equipment: pH control in a SDR | 2011 |
|
Dena Ghiasy Professor Kamelia Boodhoo Dr Ming Tham
| Thermographic analysis of thin liquid films on a rotating disc: Approach and Challenges | 2011 |
|
Dr Suixian Yang Dr Ming Tham
| Repetitive control approach towards automatic tuning of Smith predictor controllers | 2009 |
|
Professor Galip Akay Dr Burak Calkan Fernando Herrera Elizalde Andrea Jordan Aziz Mohamed et al. | Performance of an intensified downdraft gasifier at 50kWe and 1 Mwe scales | 2008 |
|
Dr Ming Tham
| Disturbance observer design for continuous systems with delay | 2007 |
|
Dr Ming Tham
| Disturbance Observer Design for Continuous Systems with Delay | 2007 |
|
Nasser Al-Hatmi Dr Ming Tham
| Dynamic Modelling and Simulation of a Horizontal 3-phase Separator | 2007 |
|
Dr Ming Tham
| Estimating output variance in closed loop systems | 2007 |
|
Dr Ming Tham
| IMC based Tuning of Set-point Weighting | 2007 |
|
Dr Ming Tham
| PID Design Approaches for Higher-Order Plants | 2007 |
|
Dr Ming Tham
| PID design using a Maximum Sensitivity Specification | 2007 |
|
Dr Ming Tham
| Control strategies for process intensified systems | 2006 |
|
Nasser Al-Hatmi Dr Ming Tham
| Controllability and resiliency aspects of gravity three-phase horizontal separators | 2006 |
|
Dr Ming Tham
| Disturbance suppression in mechatronic systems: disturbance observers and IMC | 2006 |
|
Dr Ming Tham
| Estimating output variance in closed loop systems | 2006 |
|
Dr Ming Tham
| Maximum sensitivity based PID controller tuning | 2006 |
|
Dr Ming Tham
| Maximum sensitivity based PID controller tuning: A survey and comparison | 2006 |
|
Dr Ming Tham
| Reducing interactions in decentralised control schemes | 2006 |
|
Dr Ming Tham
| An undergraduate CACSD project: The control of mean arterial blood pressure during surgery | 2005 |
|
Dr Ming Tham
| A comparison of simple robust PI design methods: Studies on a multivariable system | 2004 |
|
Dr Ming Tham
| Gain and phase margin controller tuning: FOPTD or IPDT model-based methods? | 2004 |
|
Dr Ming Tham
| An observer for linear time-delay systems | 2003 |
|
Dr Ming Tham
| An observer for linear time-delay systems | 2003 |
|
Dr Ming Tham
| Performance envelopes of process intensified systems | 2003 |
|
Farah Taip Dr Ming Tham
| Revisiting PID control | 2003 |
|
Dr Ming Tham
| A process engineering virtual teaching environment | 2002 |
|
Dr Dominic Searson Dr Ming Tham
| An assessment of an online sensor validation and reconstruction method | 2002 |
|
Dr Ming Tham
| Control of an intensified process | 2002 |
|
Dr Ming Tham Dr Sue Haile
| Designing for a sustainable future - promoting outreach through the use of case studies | 2002 |
|
Dr Ming Tham Dr Sue Haile
| Designing for a Sustainable Future – Promoting Outreach through the use of Case Studies | 2002 |
|
Dr Ming Tham Dr Sue Haile
| Designing for a Sustainable Future – Promoting Outreach through the use of Case Studies | 2002 |
|
Dr Ming Tham
| Medical Informatics: Intelligent Patient Monitoring in the O.R. | 2002 |
|
Dr Ming Tham Professor Gary Montague Professor Jarka Glassey Dr Mark Willis
| Practical inferential estimation using artificial neural networks | 2002 |
|
Dr Ming Tham
| The evolution of mechanical engineering curricula: mechatronics | 2002 |
|
Dr Ming Tham
| Inverse model control using recurrent networks | 2000 |
|
Dr Ming Tham Dr Mark Willis
| A robust tuning procedure for adaptive inferential control | 1999 |
|
Dr Ming Tham Dr Mark Willis
| A robust tuning procedure for adaptive inferential control | 1999 |
|
Dr Hugo Hiden Dr Mark Willis Dr Ming Tham Professor Gary Montague
| Non-linear principal components analysis using genetic programming | 1999 |
|