Publications by Dr Susan Scholes - ePrints

Browsing publications by Dr Susan Scholes.

Newcastle Authors	Title	Year
Dr Susan Scholes Dr David Greenwood Dr Ilias Sarantakos Professor Sara Walker	System stress with expanded use of interconnectors in the transition to net-zero	2023
Professor Andrea Dolfini Dr Susan Scholes Professor Tom Joyce	Testing the efficiency of Bronze Age axes: An interdisciplinary experiment	2023
Dr Emma Ritchie Dr Susan Scholes Raghu Sidaginamale Professor David Deehan Professor Tom Joyce et al.	A comparative surface topographical analysis of explanted total knee replacement prostheses: Oxidised zirconium vs cobalt chromium femoral components	2017
Dr Susan Scholes Benjamin Hunt David Langton Professor Tom Joyce	Explant analysis of the Biomet Magnum/ReCap metal-on-metal hip joint	2017
David Langton Dr Peter Avery Dr Martin Bone Professor David Deehan James Holland et al.	Investigation of Taper Failure in a Contemporary Metal-on-Metal Hip Arthroplasty System Through Examination of Unused and Explanted Prostheses	2017
Dr Susan Scholes Dr Andrew Naylor Professor Tom Joyce	Potential synthetic biolubricant as an alternative to bovine serum	2016
Dr Simon Smith Dr Susan Scholes Emeritus Professor Garth Johnson Professor Tom Joyce	In vitro wear testing of a contemporary design of reverse shoulder prosthesis	2015
Dr Richard Holleyman Dr Susan Scholes Professor Tom Joyce Professor David Deehan	Changes in surface topography at the TKR backside articulation following in-vivo service: A retrieval analysis	2015
Dr Martin Bone Raghu Sidaginamale James Lord Dr Susan Scholes Professor Tom Joyce et al.	Determining material loss from the femoral stem trunnion in hip arthroplasty using a coordinate measuring machine	2015
Dr Susan Scholes	Retrieval analysis of alumina ceramic-on-ceramic bearing couples	2014
Dr Susan Scholes Professor Tom Joyce	Ceramic-On-Ceramic Joints: A Suitable Alternative Material Combination?	2013
Dr Susan Scholes	Does surface wettability influence the friction and wear of large-diameter CoCrMo alloy hip resurfacings?	2013
Dr Susan Scholes Professor Tom Joyce	In vitro tests of substitute lubricants for wear testing orthopaedic biomaterials	2013
Dr Susan Scholes Dr Emma Ritchie Professor Tom Joyce	Topographical analysis of the femoral components of ex vivo total knee replacements	2013
Dr Susan Scholes	The wear performance of PEEK-OPTIMA based self-mating couples	2010
Dr Susan Scholes	Compliant layer bearings in artificial joints. Part II: Simulator and fatigue testing to assess the durability of the interface between an elastomeric layer and a rigid substrate	2009
Dr Susan Scholes	Pitch-based CFR-PEEK-OPTIMA assessed as a bearing material in a mobile bearing unicondylar knee joint	2009
Dr Susan Scholes	Wear studies on the likely performance of CFR-PEEK/CoCrMo for use as artificial joint bearing materials	2009
Dr Susan Scholes	Compliant layer bearings in artificial joints Part I: The effects of different manufacturing techniques on the interface strength between an elastomeric layer and a rigid substrate	2008
Dr Susan Scholes	Compliant layer tibial bearing inserts: friction testing of different materials and designs for a new generation of prosthesis that mimics the natural joint	2008
Dr Susan Scholes	Tribological assessment of a flexible CFR-PEEK acetabular cup articulating against an alumina femoral head	2008
Dr Susan Scholes	Laboratory studies on the tribology of hard bearing hip prostheses: ceramic on ceramic and metal on metal	2007
Dr Susan Scholes	Polyurethane unicondylar knee prostheses: simulator wear tests and lubrication studies	2007
Dr Susan Scholes	The wear properties of CFR-PEEK articulating against ceramic assessed on a multidirectional pin-on-plate machine	2007
Dr Susan Scholes	Compliant layer acetabular cups: friction testing of a range of materials and designs for a new generation of prosthesis that mimics the natural joint	2006
Dr Susan Scholes	The effect of ‘running-in’ on the tribology and surface morphology of metal-on-metal Birmingham hip resurfacing device in simulator studies	2006
Dr Susan Scholes	The effect of proteins on the friction and lubrication of artificial joints	2006
Dr Susan Scholes	The tribology of metal-on-metal total hip replacements	2006
Dr Susan Scholes	Design aspects of compliant, soft layer bearings for an experimental hip prosthesis	2005
Dr Susan Scholes	The effect of bone cement particles on the friction of polyethylene and polyurethane knee bearings	2004
Dr Susan Scholes	Relative movement between Kinemax Plus tibial inserts and the tibial base-plates	2003
Dr Susan Scholes Dr Simon Smith	The lubrication and friction of conventional UHMWPE, novel compliant layer and hard bearing surfaces for use in total hip prostheses	2002
Dr Susan Scholes	Pin-on-plate studies on the effect of rotation on the wear of metal-on-metal samples	2001
Dr Susan Scholes	The wear of metal-on-metal total hip prostheses measured in a hip simulator	2001
Dr Susan Scholes	A frictional study of total hip joint replacements	2000
Professor Tom Joyce Dr Susan Scholes	A multi-directional wear screening device and preliminary results of UHMWPE articulating against stainless steel	2000
Dr Susan Scholes	Comparison of friction and lubrication of different hip prostheses	2000
Dr Susan Scholes	The effects of material combination and lubricant on the friction of total hip prostheses	2000