Dr Jishan Zhang
Professor Brian Shaw
Ian Sewell
| Effects of Surface Engineering on the Efficiency of Involute Helical Gears – An Experimental Investigation | 2023 |
|
Tom Reavie
Dr Robert Frazer
Professor Brian Shaw
| Filtering effects on involute gear form measurement | 2023 |
|
Dr Timothy Lisle
Christian Little
Christopher Aylott
Professor Brian Shaw
| Bending fatigue strength of aerospace quality gear steels at ambient and elevated temperatures | 2022 |
|
Dr Timothy Lisle
Professor Brian Shaw
Dr Robert Frazer
Yang Yang
Layue Zhao
et al. | Low noise and transmission error epicylic gearbox designs | 2021 |
|
Christopher Aylott
Professor Brian Shaw
| Case depth prediction of nitrided samples with Barkhausen noise measurement | 2019 |
|
Dr Timothy Lisle
Professor Brian Shaw
Dr Robert Frazer
| Internal spur gear root bending stress: A comparison of ISO 6336:1996, ISO 6336:2006, VDI 2737:2005, AGMA, ANSYS finite element analysis and strain gauge techniques | 2019 |
|
Dr Mohamed Blaow
Professor Brian Shaw
| Non-Destructive Characterization of Subsurface Plastic Deformation in Case Carburized Steel Using Magnetic Barkhausen Noise Technique | 2019 |
|
Tom Reavie
Giorge Koulin
Dr Robert Frazer
Stephen Wilson
Professor Brian Shaw
et al. | A method to quantify waviness measurement capability of a gear measurement machine | 2018 |
|
Robert Lambert
Professor Brian Shaw
| Evaluation of bending fatigue strength in automotive gear steel subjected to shot peening techniques | 2018 |
|
Dr Timothy Lisle
Professor Brian Shaw
Dr Robert Frazer
| Low noise and transmission error epicyclic gearbox designs | 2018 |
|
Christopher Aylott
Dr Timothy Lisle
Professor Brian Shaw
| The effect of tooth edge chamfer condition on the bending fatigue performance of carburised gears | 2018 |
|
Giorge Koulin
Dr Jishan Zhang
Dr Robert Frazer
Professor Brian Shaw
Ian Sewell
et al. | A new profile roughness measurement approach for involute helical gears | 2017 |
|
Giorge Koulin
Tom Reavie
Dr Robert Frazer
Professor Brian Shaw
| Economic method for helical gear flank surface characterisation | 2017 |
|
Dr Hemantha Yeddu
Professor Brian Shaw
| Effect of thermal cycling on martensitic transformation and mechanical strengthening of stainless steels - A phase-field study | 2017 |
|
Dr Robert Frazer
Professor Brian Shaw
| Effects of profile errors on lubrication performance of helical gears | 2017 |
|
Dr Timothy Lisle
Professor Brian Shaw
Dr Robert Frazer
| External spur gear root bending stress: A comparison of ISO 6336:2006, AGMA 2101-D04, ANSYS finite element analysis and strain gauge techniques | 2017 |
|
Giorge Koulin
Dr Jishan Zhang
Dr Robert Frazer
Stephen Wilson
Professor Brian Shaw
et al. | Improving applied roughness measurement of involute helical gears | 2017 |
|
Zheng Liu
Professor Gui Yun Tian
Dr Wenping Cao
Professor Brian Shaw
Robert Lambert
et al. | Non-invasive load monitoring of induction motor drives using magnetic flux sensors | 2017 |
|
Professor Brian Shaw
Dr Moorthy Vaidhianathasamy
| Novel adaptation of the spectral kurtosis for vibration diagnosis of gearboxes in non-stationary conditions | 2017 |
|
Dr Jishan Zhang
Professor Brian Shaw
| Performance of gears with WC/C coating | 2017 |
|
Layue Zhao
Dr Robert Frazer
Professor Brian Shaw
| The influence of overlap ratio on transmission error in parallel axis gears | 2017 |
|
Professor Brian Shaw
Dr Moorthy Vaidhianathasamy
| Vibration diagnosis of a gearbox by wavelet bicoherence technology | 2017 |
|
Giorge Koulin
Ian Sewell
Professor Brian Shaw
| Circular and Faceted Monopile Installation Fatigue Damage | 2016 |
|
Layue Zhao
Dr Robert Frazer
Professor Brian Shaw
| Comparative study of stress analysis of gears with different helix angle using the ISO 6336 standard and TCA methods | 2016 |
|
Professor Brian Shaw
| Effect of excitation field strength on magnetic Barkhausen noise profile in case carburized EN 36 steel | 2015 |
|
Dr Jishan Zhang
Professor Brian Shaw
| Experimental and analytical study of gear micropitting initiation and propagation under varying loading conditions | 2015 |
|
Giorge Koulin
Ian Sewell
Professor Brian Shaw
| Faceted Monopile Design Suitable for Mass Production and Upscaling | 2015 |
|
Professor Gui Yun Tian
Dr Bin Gao
Dr Jishan Zhang
Professor Brian Shaw
Dr Aijun Yin
et al. | Non-destructive Evaluation of Early Contact Fatigue Using Eddy Current Pulsed Thermography | 2015 |
|
Professor Brian Shaw
Dr Jishan Zhang
| Probabilistic analysis of gear flank micro-pitting risk in wind turbine gearbox using supervisory control and data acquisition data | 2015 |
|
Professor Gui Yun Tian
Dr Aijun Yin
Dr Bin Gao
Dr Jishan Zhang
Professor Brian Shaw
et al. | Eddy current pulsed thermography for fatigue evaluation of gear | 2014 |
|
Dr Mohamed Blaow
Professor Brian Shaw
| Magnetic Barkhausen noise for reliable detection of the heat affected zone in welded ship steel plate | 2014 |
|
Dr Jishan Zhang
Professor Brian Shaw
| A simple model for the study of the tolerance of interfacial crack under thermal load | 2013 |
|
Dr Moorthy Vaidhianathasamy
Professor Brian Shaw
| An observation on the initiation of micro-pitting damage in as-ground and coated gears during contact fatigue | 2013 |
|
Professor Brian Shaw
Dr Jishan Zhang
| Analysis of Micro-Elastohydrodynamic Lubrication and Prediction of Surface Fatigue Damage in Micropitting Tests on Helical Gears | 2013 |
|
Dr Moorthy Vaidhianathasamy
Professor Brian Shaw
| Contact fatigue performance of helical gears with surface coatings | 2012 |
|
Dr Moorthy Vaidhianathasamy
Professor Brian Shaw
| Effect of as-ground surface and the BALINIT (R) C and Nb-S coatings on contact fatigue damage in gears | 2012 |
|
Dr Jishan Zhang
Professor Brian Shaw
| The Effect of Superfinishing on the Contact Fatigue of Case Carburised Gears | 2011 |
|
Ahmed Onsy Onsy
Dr Bob Bicker
Professor Brian Shaw
| A novel intelligent health monitoring system for gear fatigue failure prediction | 2010 |
|
Ahmed Onsy Onsy
Dr Bob Bicker
Professor Brian Shaw
| Intelligent diagnostic health management of power transmission systems: An experimental validation | 2010 |
|
Professor Brian Shaw
Dr Moorthy Vaidhianathasamy
| Local damage diagnosis in gearboxes using novel wavelet technology | 2010 |
|
Professor Brian Shaw
Christopher Aylott
Dr Adrian Oila
| Characterisation of microstructural transformations in micropitted gears | 2009 |
|
John Wilson
Professor Gui Yun Tian
Dr Moorthy Vaidhianathasamy
Professor Brian Shaw
| Magneto-Acoustic Emission and Magnetic Barkhausen Emission for Case Depth Measurement in En36 Gear Steel | 2009 |
|
Professor Brian Shaw
| A numerical simulation to relate the shot peening parameters to the induced residual stresses | 2008 |
|
Professor Brian Shaw
| A numerical study of the residual stress pattern from single shot impacting on a metallic component | 2008 |
|
Professor Brian Shaw
| A three-dimensional finite element analysis of two/multiple shots impacting on a metallic component | 2008 |
|
Dr Moorthy Vaidhianathasamy
Professor Brian Shaw
| Assessment of Grinding Damage on Gear Teeth using Magnetic Barkhausen Noise Measurements | 2008 |
|
Dr Moorthy Vaidhianathasamy
Professor Brian Shaw
| Evaluation of Contact Fatigue Damage on Gears using the Magnetic Barkhausen Noise Technique | 2008 |
|
Dr Moorthy Vaidhianathasamy
Professor Brian Shaw
| Magnetic Barkhausen emission measurements for evaluation of material properties in gears | 2008 |
|
Christopher Aylott
Professor Brian Shaw
| Martensite decay in gears under contact stress | 2008 |
|
Emeritus Professor Terry Evans
Dr Andrew Metcalfe
Professor Brian Shaw
| Optimization of a shot peening process | 2008 |
|
Emeritus Professor Terry Evans
Dr Andrew Metcalfe
Professor Brian Shaw
| Optimization of a shot peening process | 2008 |
|
Mohamed Blaow
Emeritus Professor Terry Evans
Professor Brian Shaw
| The effect of microstructure and applied stress on magnetic Barkhausen emission in induction hardened steel | 2007 |
|
Mohamed Blaow
Emeritus Professor Terry Evans
Professor Brian Shaw
| Effect of hardness and composition gradients on Barkhausen emission in case hardened steel | 2006 |
|
Dr Moorthy Vaidhianathasamy
Professor Brian Shaw
| Surface and subsurface stress evaluation in case-carburised steel using high and low frequency magnetic barkhausen emission measurements | 2006 |
|
Christopher Aylott
Professor Brian Shaw
| Influence of material property on micropitting and pitting behavior | 2005 |
|
Dr Moorthy Vaidhianathasamy
Professor Brian Shaw
| Magnetic Barkhausen emission technique for detecting the overstressing during bending fatigue in case-carburised En36 steel | 2005 |
|
Dr Moorthy Vaidhianathasamy
Professor Brian Shaw
| Magnetic Barkhausen emission technique for evaluation of residual stress alteration by grinding in case-carburised En36 steel | 2005 |
|
Mohamed Blaow
Emeritus Professor Terry Evans
Professor Brian Shaw
| Magnetic barkhausen noise: The influence of microstructure and deformation in bending | 2005 |
|
Dr Adrian Oila
Professor Brian Shaw
Christopher Aylott
Professor Steve Bull
| Martensite decay in micropitted gears | 2005 |
|
Emeritus Professor Terry Evans
Professor Brian Shaw
| Spherical indentation fatigue cracking | 2005 |
|
Mohamed Blaow
Emeritus Professor Terry Evans
Professor Brian Shaw
| Surface decarburisation of steel detected by magnetic barkhausen emission | 2005 |
|
Mohamed Blaow
Emeritus Professor Terry Evans
Professor Brian Shaw
| Effect of deformation in bending on magnetic Barkhausen noise in low alloy steel | 2004 |
|
Dr Moorthy Vaidhianathasamy
Professor Brian Shaw
| Erratum: Evaluation of applied and residual stresses in case-carburised En36 steel subjected to bending using the magnetic Barkhausen emission technique (vol 52, pg 1927, 2004) | 2004 |
|
Dr Moorthy Vaidhianathasamy
Professor Brian Shaw
| Evaluation of applied and residual stresses in case-carburised En36 steel subjected to bending using the magnetic Barkhausen emission technique | 2004 |
|
Emeritus Professor Trevor Page
Professor Brian Shaw
| Scanning electron acoustic microscopy (SEAM): A technique for the detection of contact-induced surface & sub-surface cracks | 2004 |
|
Dr Moorthy Vaidhianathasamy
Professor Brian Shaw
| Testing of case depth in case carburized gear steels using magnetic barkhausen emission technique | 2004 |
|
Dr Fouad Abudaia
Emeritus Professor Terry Evans
Professor Brian Shaw
| Characterization of retained austenite in case carburized gears and its influence on fatigue performance | 2003 |
|
Professor Brian Shaw
Emeritus Professor Terry Evans
| Evaluation of tempering induced changes in the hardness profile of case-carburised EN36 steel using magnetic Barkhausen noise analysis | 2003 |
|
Professor Brian Shaw
Christopher Aylott
| The role of residual stress on the fatigue strength of high performance gearing | 2003 |
|
Dr Alexander Korsunsky
Christopher Aylott
Professor Brian Shaw
| Residual stresses in induction-hardened gear teeth mapped by neutron diffraction | 2002 |
|
Professor Brian Shaw
Dr Fouad Abudaia
Emeritus Professor Terry Evans
| Characterization of Retained Austenite in Case Carburized Gears and Its Influence on Fatigue Performance | 2001 |
|
Dr Moorthy Vaidhianathasamy
Professor Brian Shaw
| Material Quality Determination using Barkhausen Noise Analysis | 2001 |
|
Professor Brian Shaw
Dr Fouad Abudaia
Emeritus Professor Terry Evans
| Characterization of retained austenite in case carburized gears and its influence on fatigue performance. | 2000 |
|
Dr Alexander Korsunsky
Karen Wells
Professor Brian Shaw
| Comparative study of diffraction methods for strain measurement in a particulate MMC | 2000 |
|
Dr Jack Hale
Professor Brian Shaw
Dr Stephen Speake
Professor Geoff Gibson
| High temperature failure envelopes for thermosetting composite pipes in water | 2000 |
|
Professor Brian Shaw
Robin Ashby
Emeritus Professor Terry Evans
| The Use of Controlled Post Heat Treatment Cleaning and Peening to Enhance the Fatigue Strength and Reliability of Case Carburized Gears | 2000 |
|
Dr Alexander Korsunsky
Karen Wells
Professor Brian Shaw
| A comparative study of diffraction methods for strain measurement in a particulate MMC | 1999 |
|
Professor Steve Bull
Emeritus Professor Terry Evans
Professor Brian Shaw
Professor Dieter Hofmann OBE
| The effect of the white layer on micro-pitting and surface contact fatigue failure of nitrided gears | 1999 |
|
