Dr Zheng Gong
Dr Dehong Huo
Dr Wanqun Chen
| Robustness evaluation of control algorithms for a long-stroke fast tool servo | 2022 |
|
Lu Zheng
Dr Wanqun Chen
Dr Dehong Huo
| Investigation on the tool wear suppression mechanism in non-resonant vibration-assisted micro milling | 2020 |
|
Lu Zheng
Dr Wanqun Chen
Dr Dehong Huo
| Review of vibration devices for vibration-assisted machining | 2020 |
|
Lu Zheng
Dr Wanqun Chen
Dr Dehong Huo
| Experimental investigation on burr formation in vibration-assisted micro-milling of Ti-6Al-4V | 2019 |
|
Dr Wanqun Chen
Dr Dehong Huo
Xiangyu Teng
| Modelling of the Influence of Tool Runout on Surface Generation in Micro Milling | 2019 |
|
Xiangyu Teng
Dr Wanqun Chen
| Simulation and experimental investigation on the cutting mechanism and surface generation in machining SiCp/Al MMCs | 2019 |
|
Dr Wanqun Chen
Dr Dehong Huo
| A new surface topography-based method to quantify axial error of high speed milling cutters | 2018 |
|
Dr Wanqun Chen
Dr Dehong Huo
| A novel 3D surface generation model for micro milling based on homogeneous matrix transformation and dynamic regenerative effect | 2018 |
|
Xiangyu Teng
Dr Dehong Huo
Dr Islam Shyha
Dr Wanqun Chen
Dr Eugene Wong
et al. | An experimental study on tool wear behaviour in micro milling of nano Mg/Ti metal matrix composites | 2018 |
|
Dr Wanqun Chen
Xiangyu Teng
Lu Zheng
Dr Dehong Huo
| Burr reduction mechanism in vibration-assisted micro milling | 2018 |
|
Xiangyu Teng
Dr Wanqun Chen
Dr Dehong Huo
Dr Islam Shyha
| Comparison of cutting mechanism when machining micro and nano-particles reinforced SiC/Al metal matrix composites | 2018 |
|
Xiangyu Teng
Dr Dehong Huo
Dr Wanqun Chen
Dr Eugene Wong
Lu Zheng
et al. | Finite element modelling on cutting mechanism of nano Mg/SiC metal matrix composites considering cutting edge radius | 2018 |
|
Dr Wanqun Chen
| Investigation on cutting mechanism of SiCp/Al composites in precision turning | 2018 |
|
Dr Dehong Huo
Dr Wanqun Chen
Xiangyu Teng
Lu Zheng
| Investigation on cutting mechanism of vibration assisted micro-milling | 2018 |
|
Qiang Gao
Dr Wanqun Chen
Dr Dehong Huo
| Investigation on the performance of an aerostatic spindle with consideration of fluid-structure-thermal interaction effect | 2018 |
|
Dr Wanqun Chen
Dr Dehong Huo
Dr Jack Hale
| Kinematics and tool-workpiece separation analysis of vibration assisted milling | 2018 |
|
Lu Zheng
Dr Wanqun Chen
Dr Michele Pozzi
Xiangyu Teng
Dr Dehong Huo
et al. | Modulation of surface wettability by vibration assisted milling | 2018 |
|
Dr Wanqun Chen
Dr Dehong Huo
Dr Jack Hale
| State-of-the-art review on vibration-assisted milling: principle, system design, and application | 2018 |
|
Dr Wanqun Chen
Lu Zheng
Dr Dehong Huo
| Surface texture formation by non-resonant vibration assisted micro milling | 2018 |
|
Dr Wanqun Chen
Xiangyu Teng
Dr Dehong Huo
| An improved cutting force model for micro milling considering machining dynamics | 2017 |
|
Xiangyu Teng
Dr Dehong Huo
Dr Wanqun Chen
| An investigation into finite element modelling of micro machining of nano Mg/SiC metal matrix composites | 2017 |
|
Dr Dehong Huo
Dr Wanqun Chen
Lu Zheng
Dr Jack Hale
| Development of a high bandwidth XY stage for vibration-assisted milling | 2017 |
|
Dr Wanqun Chen
Dr Dehong Huo
Dr Jack Hale
| Investigation on cutting mechanism in vibration assisted micro milling | 2017 |
|
Dr Wanqun Chen
Dr Dehong Huo
| Modeling of interaction between precision machining process and machine tools | 2017 |
|
Dr Dehong Huo
Dr Wanqun Chen
Xiangyu Teng
| Modeling the Influence of Tool Deflection on Cutting Force and Surface Generation in Micro-Milling | 2017 |
|
Dr Wanqun Chen
Dr Dehong Huo
Xiangyu Teng
| Surface generation modelling for micro end milling considering the minimum chip thickness and tool runout | 2017 |
|
Dr Wanqun Chen
| Aerostatic thrust bearing performances analysis considering the fluid-structure coupling effect | 2016 |
|
Dr Wanqun Chen
Dr Dehong Huo
Xiangyu Teng
| Integrated simulation method for interaction between manufacturing process and machine tool | 2016 |
|
Dr Wanqun Chen
Dr Dehong Huo
| A novel machine tool design approach based on surface generation simulation and its implementation on a fly cutting machine tool | 2015 |
|
