Toggle Main Menu Toggle Search

Open Access padlockePrints

Browsing publications by Dr Dehong Huo.

Newcastle AuthorsTitleYearFull text
Dr Dehong Huo
Computational and Experimental Analysis of Surface Residual Stresses in Polymers via Micro-Milling2024
Dr Dehong Huo
Tool condition monitoring in micro milling of brittle materials2024
Dr Vinod Satpute
Dr Dehong Huo
Dr John Hedley
Dr Mohammed Elgendy
Design of a novel 2D ultrasonic transducer for 2D high-frequency vibration–assisted micro-machining2023
Dr Dehong Huo
Enhancement Mechanism of Fish-Scale Surface Texture on Flow Switching and Mixing Efficiency in Microfluidic Chips2023
Dr Guoyu Fu
Dr Dehong Huo
Dr Islam Shyha
Experimental investigation on thermomechanical properties and micro-machinability of carbon nanofibre reinforced epoxy nanocomposites2023
Dr Zheng Gong
Dr Dehong Huo
A novel long-stroke fast tool servo system with counterbalance and its application to the ultra-precision machining of microstructured surfaces2022
Dr Dehong Huo
Dynamic performance of a long-stroke fast tool servo system2022
Dr Guoyu Fu
Dr Fuzhong Sun
Dr Dehong Huo
Dr Islam Shyha
Chenggang Fang
et al.
Finite element and experimental studies on the machining process of polymer/graphene nanoplatelet nanocomposites2022
Dr Guoyu Fu
Dr Dehong Huo
Finite Element Modelling of Micromachining Process for Epoxy/Graphene Nanoplatelet Nanocomposites2022
Dr Zheng Gong
Dr Dehong Huo
Investigation of control algorithm for long-stroke fast tool servo system2022
Dr Dehong Huo
Machinability analysis of dry and liquid nitrogen–based cryogenic cutting of Inconel 718: experimental and FE analysis2022
Dr Guoyu Fu
Dr Dehong Huo
Dr Islam Shyha
Dr Fuzhong Sun
Qiang Gao
et al.
Machinability investigation of polymer/GNP nanocomposites in micro-milling2022
Dr Zheng Gong
Dr Dehong Huo
Dr Wanqun Chen
Robustness evaluation of control algorithms for a long-stroke fast tool servo2022
Chenggang Fang
Dr Dehong Huo
A comprehensive analysis of factors affecting the accuracy of the precision hydrostatic spindle with mid-thrust bearing layout2021
Dr Dehong Huo
A novel method of blade-inclined ultrasonic cutting nomex honeycomb core with straight blade2021
Dr Dehong Huo
An energy-based analysis for machining novel AZ91 magnesium composite foam dispersed with ceramic microspheres2021
Dr Guoyu Fu
Dr Long Jiang
Dr Dehong Huo
Dr Islam Shyha
An experimental investigation on tool wear behaviour of uncoated and coated micro-tools in micro-milling of graphene-reinforced polymer nanocomposites2021
Xiangyu Teng
Dr Dehong Huo
Conventional Machining of Metal Matrix Composites2021
Dr Guoyu Fu
Dr Dehong Huo
Dr Islam Shyha
FE-simulation of machining processes of epoxy with Mulliken Boyce model2021
Xiangyu Teng
Dr Dehong Huo
Finite Element Modelling of Machining of Metal Matrix Composites2021
Dr Dehong Huo
Introduction2021
Chenggang Fang
Dr Dehong Huo
Investigations of the static and dynamic characteristics of the precision hydrostatic spindle with mid-thrust bearing under different loads2021
Dr Dehong Huo
Machining of Nano-Structured Polymer Composites2021
Dr Guoyu Fu
Dr Dehong Huo
Micro-end-milling of carbon nanotube reinforced epoxy nanocomposites manufactured using three roll mill technique2021
Jiayi Chen
Dr Dehong Huo
Dr Hemantha Yeddu
Molecular dynamics study of phase transformations in NiTi shape memory alloy embedded with precipitates2021
Dr Dehong Huo
Multiscale modelling and analysis for design and development of a high-precision aerostatic bearing slideway and its digital twin2021
Dr Islam Shyha
Dr Dehong Huo
Peyman Hesamikojidi
Performance of a new hybrid cutting-abrasive tool for the machining of fibre reinforced polymer composites2021
Dr Zi Jie Choong
Dr Dehong Huo
Dr Nilhil Ponon
Rachael Savidis
Professor Patrick Degenaar
et al.
A novel hybrid technique to fabricate silicon-based micro-implants with near defect-free quality for neuroprosthetics application2020
Dr Dehong Huo
Xiangyu Teng
Dr Islam Shyha
A review on nanocomposites. Part 2: Micromachining2020
Dr Dehong Huo
Ecofriendly inclined drilling of carbon fiber-reinforced polymers (CFRP)2020
Dr Guoyu Fu
Dr Dehong Huo
Dr Islam Shyha
Dr Ketan Pancholi
Experimental investigation on micromachining of epoxy/graphene nano platelet nanocomposites2020
Babis Tzivelekis
Pavlos Sgardelis
Dr Kevin Waldron
Dr Richard Whalley
Dr Dehong Huo
et al.
Fabrication routes via projection stereolithography for 3D-printing of microfluidic geometries for nucleic acid amplification2020
Lu Zheng
Dr Wanqun Chen
Dr Dehong Huo
Investigation on the tool wear suppression mechanism in non-resonant vibration-assisted micro milling2020
Dr Fuzhong Sun
Dr Dehong Huo
Dr Guoyu Fu
Xiangyu Teng
Micro-drilling of Mg-based MMCs reinforced with SiO2 nanoparticles: An experimental approach2020
Lu Zheng
Dr Wanqun Chen
Dr Dehong Huo
Review of vibration devices for vibration-assisted machining2020
Dr Dehong Huo
A forward closed-loop virtual simulation system for milling process considering dynamics processing-machine interactions2019
Qiang Gao
Dr Dehong Huo
Aerostatic bearings design and analysis with the application to precision engineering: State-of-the-art and future perspectives2019
Dr Zi Jie Choong
Dr Dehong Huo
Professor Patrick Degenaar
Professor Anthony O'Neill
Edge chipping minimisation strategy for milling of monocrystalline silicon: A molecular dynamics study2019
Dr Ketan Pancholi
Dr Dehong Huo
Maggie White
Effect of Oleic Acid Coating of Iron Oxide Nanoparticles on Properties of Magnetic Polyamide-6 Nanocomposite2019
Lu Zheng
Dr Wanqun Chen
Dr Dehong Huo
Experimental investigation on burr formation in vibration-assisted micro-milling of Ti-6Al-4V2019
Wenjun Chen
Lu Zheng
Xiangyu Teng
Dr Dehong Huo
Finite element simulation and experimental investigation on cutting mechanism in vibration-assisted micro-milling2019
Qiang Gao
Dr Dehong Huo
Investigation on the thermal behavior of an aerostatic spindle system considering multi-physics coupling effect2019
Dr Zi Jie Choong
Dr Dehong Huo
Professor Patrick Degenaar
Professor Anthony O'Neill
Micro-machinability and edge chipping mechanism studies on diamond micro-milling of monocrystalline silicon2019
Lu Zheng
Dr Dehong Huo
Modelling and experimental investigation on textured surface generation in vibration-assisted micro-milling2019
Dr Wanqun Chen
Dr Dehong Huo
Xiangyu Teng
Modelling of the Influence of Tool Runout on Surface Generation in Micro Milling2019
Dr Dehong Huo
Maggie White
Novel method of healing the fibre reinforced thermoplastic composite: A potential model for offshore applications2019
Dr Ketan Pancholi
Dr Dehong Huo
Observation of stimulated emission from Rhodamine 6G-polymer aggregate adsorbed at foam interface2019
Dr Dehong Huo
Vibration assisted machining2019
Dr Wanqun Chen
Dr Dehong Huo
A new surface topography-based method to quantify axial error of high speed milling cutters2018
Dr Wanqun Chen
Dr Dehong Huo
A novel 3D surface generation model for micro milling based on homogeneous matrix transformation and dynamic regenerative effect2018
Xiangyu Teng
Dr Dehong Huo
Dr Islam Shyha
Dr Wanqun Chen
Dr Eugene Wong
et al.
An experimental study on tool wear behaviour in micro milling of nano Mg/Ti metal matrix composites2018
Dr Islam Shyha
Dr Dehong Huo
Analysis of Microstructure and Chip Formation When Machining Ti-6Al-4V2018
Dr Islam Shyha
Dr Dehong Huo
Dr Guoyu Fu
Analysis of surface quality when micromilling polymer nanocomposites2018
Dr Wanqun Chen
Xiangyu Teng
Lu Zheng
Dr Dehong Huo
Burr reduction mechanism in vibration-assisted micro milling2018
Xiangyu Teng
Dr Wanqun Chen
Dr Dehong Huo
Dr Islam Shyha
Comparison of cutting mechanism when machining micro and nano-particles reinforced SiC/Al metal matrix composites2018
Dr Islam Shyha
Dr Dehong Huo
Experimental analysis of system parameters for minimum cutting fluid consumption when machining Ti-6Al-4V using a novel supply system2018
Xiangyu Teng
Dr Dehong Huo
Dr Wanqun Chen
Dr Eugene Wong
Lu Zheng
et al.
Finite element modelling on cutting mechanism of nano Mg/SiC metal matrix composites considering cutting edge radius2018
Dr Dehong Huo
Dr Wanqun Chen
Xiangyu Teng
Lu Zheng
Investigation on cutting mechanism of vibration assisted micro-milling2018
Dr Islam Shyha
Dr Dehong Huo
Dr Guoyu Fu
Investigation on micro-slotting of polymer nanocomposites: Cutting forces2018
Qiang Gao
Dr Wanqun Chen
Dr Dehong Huo
Investigation on the performance of an aerostatic spindle with consideration of fluid-structure-thermal interaction effect2018
Amin Dadgari
Dr Dehong Huo
Dr David Swailes
Investigation on tool wear and tool life prediction in micro-milling of Ti-6Al-4V2018
Dr Wanqun Chen
Dr Dehong Huo
Dr Jack Hale
Kinematics and tool-workpiece separation analysis of vibration assisted milling2018
Dr Dehong Huo
Modelling and analysis of characteristics of a piezoelectric-actuated micro-/nano compliant platform using bond graph approach2018
Lu Zheng
Dr Wanqun Chen
Dr Michele Pozzi
Xiangyu Teng
Dr Dehong Huo
et al.
Modulation of surface wettability by vibration assisted milling2018
Dr Wanqun Chen
Dr Dehong Huo
Dr Jack Hale
State-of-the-art review on vibration-assisted milling: principle, system design, and application2018
Dr Wanqun Chen
Lu Zheng
Dr Dehong Huo
Surface texture formation by non-resonant vibration assisted micro milling2018
Dr Wanqun Chen
Xiangyu Teng
Dr Dehong Huo
An improved cutting force model for micro milling considering machining dynamics2017
Xiangyu Teng
Dr Dehong Huo
Dr Wanqun Chen
An investigation into finite element modelling of micro machining of nano Mg/SiC metal matrix composites2017
Dr Cai Cai
Dr Dehong Huo
Design and analysis of cleaning mechanism for an intermittent screw-driven pipeline robot2017
Dr Dehong Huo
Dr Wanqun Chen
Lu Zheng
Dr Jack Hale
Development of a high bandwidth XY stage for vibration-assisted milling2017
Dr Dehong Huo
Effect of Machining Parameters on the Cutting Force and Microstructure in Nanometric Cutting of Cu50Zr50 Metallic Glass2017
Dr Islam Shyha
Dr Dehong Huo
Evaluation of a novel controlled cutting fluid impinging supply system when machining titanium alloys2017
Dr Dehong Huo
Integrated self-healing of the composite offshore structures2017
Dr Islam Shyha
Dr Dehong Huo
Investigation into the effect of cutting fluid concentration on the machinability of Ti-6Al-4V using vegetable oil-based cutting fluids2017
Amin Dadgari
Dr Dehong Huo
Dr David Swailes
Investigation of Machining Tool Path on Surface Roughness and Dimensional Accuracy for High-Speed Micro Milling2017
Dr Wanqun Chen
Dr Dehong Huo
Dr Jack Hale
Investigation on cutting mechanism in vibration assisted micro milling2017
Xiangyu Teng
Dr Dehong Huo
Machinability investigation in micro-milling of Mg based MMCs with nano-sized particles2017
Xiangyu Teng
Dr Dehong Huo
Dr Eugene Wong
Machinability Investigation in Micro-milling of Mg Based MMCs with Nano-sized Particles2017
Dr Zi Jie Choong
Dr Dehong Huo
Professor Patrick Degenaar
Professor Anthony O'Neill
Micro-machining of monocrystalline silicon with improved edge quality2017
Dr Wanqun Chen
Dr Dehong Huo
Modeling of interaction between precision machining process and machine tools2017
Dr Dehong Huo
Dr Wanqun Chen
Xiangyu Teng
Modeling the Influence of Tool Deflection on Cutting Force and Surface Generation in Micro-Milling2017
Dr Andrew Naylor
Dr Dehong Huo
Operational performance of individual handsaw teeth2017
Dr Wanqun Chen
Dr Dehong Huo
Xiangyu Teng
Surface generation modelling for micro end milling considering the minimum chip thickness and tool runout2017
Dr Yan Zhao
Dr Dehong Huo
The deformation yield criterion of metallic glass in the cutting process and its experimental verification2017
Amin Dadgari
Dr Dehong Huo
Dr David Swailes
The effect of machining toolpath on surface roughness and dimensional accuracy for high-speed micro milling2017
Dr Dehong Huo
The effect of stress on shear dilatation and cutting force during nanometric machining of amorphous alloys2017
Dr Yan Zhao
Dr Dehong Huo
Crystallization of amorphous materials and deformation mechanism of nanocrystalline materials under cutting loads: a molecular dynamics simulation approach2016
Dr Michael Lau
Dr Dehong Huo
Dr Kheng-Lim Goh
Development of a two-stage Lau-Wan Wankel pump/mixer2016
Professor Fenghe Wu
Dr Dehong Huo
Development of an analytical model based on Mohr–Coulomb criterion for cutting of metallic glasses2016
Dr Dehong Huo
Dr Zi Jie Choong
Yilun Shi
Dr John Hedley
Yuanyi Zhao
et al.
Diamond Micro-milling of Lithium Niobate for Sensing applications2016
Dr Zi Jie Choong
Dr Dehong Huo
Professor Patrick Degenaar
Professor Anthony O'Neill
Effect of crystallographic orientation and employment of different cutting tools on micro-end-milling of monocrystalline silicon2016
Dr Wanqun Chen
Dr Dehong Huo
Xiangyu Teng
Integrated simulation method for interaction between manufacturing process and machine tool2016
Dr Zi Jie Choong
Dr Dehong Huo
Professor Patrick Degenaar
Professor Anthony O'Neill
Investigation of edge-chipping reduction on silicon micro-milling2016
Professor Fenghe Wu
Dr Dehong Huo
Investigation on Cutting Force and Temperature of Cutting Cu50Zr50 Metallic Glass by Molecular Dynamics Simulation2016
Xiangyu Teng
Dr Dehong Huo
Dr Eugene Wong
Srinivasan Meenakshisundaram
Micro-machinability of nanoparticle-reinforced Mg-based MMCs: An experimental investigation2016
Dr Zi Jie Choong
Dr Dehong Huo
Professor Patrick Degenaar
Professor Anthony O'Neill
Micro-Machinability Studies of Single Crystal Silicon Using Diamond End-Mill2016
Dr Dehong Huo
Potential energy/volume evolution and atomic trajectories analysis of amorphous alloys in nanometric cutting process: A molecular dynamic simulation approach2016
Dr Wanqun Chen
Dr Dehong Huo
A novel machine tool design approach based on surface generation simulation and its implementation on a fly cutting machine tool2015
Zeyad Al-Shibaany
Dr Zi Jie Choong
Dr Dehong Huo
Dr John Hedley
Dr Zhongxu Hu
et al.
CNC Machining of Lithium Niobate for Rapid Prototyping of Sensors2015
Xiangyu Teng
Dr Dehong Huo
Experiment based investigation into micro machinability of Mg based metal matrix composites (MMCs) with nano-sized reinforcements2015
Dr Ketan Pancholi
Dr Neville Dodds
Dr Dehong Huo
In situ and real time x-ray computed tomography for the micromechanics based constitutive modelling of the unbonded flexible riser2015
Yilun Shi
Dr Dehong Huo
Dr Yan Zhao
Zeyad Al-Shibaany
Dr John Hedley
et al.
Investigation of micro milling of lithium niobate for biosensor applications2015
Dr Dehong Huo
Structural design and control strategy analysis of micro/nano transmission platform2015
Dr Dehong Huo
Dr Zi Jie Choong
Dr Ketan Pancholi
Professor Patrick Degenaar
Surface and subsurface characterisation in micro-milling of monocrystalline silicon2015
Dr Yan Zhao
Dr Dehong Huo
A review of the manufacturing technologies and deformation mechanisms of amorphous alloys2014
Dr Dehong Huo
A two-round design method for ultra-precision flycutting machine tools with stringent process requirements2014
Dr Dehong Huo
Professor Kenneth Dalgarno
An experimental investigation on micro machining of fine-grained graphite2014
Dr Yan Zhao
Dr Dehong Huo
Xiangyu Teng
Yilun Shi
An experimental investigation on the surface morphology in micro-end-milling of glass2014
Dr Dehong Huo
Design philosophy of an ultra-precision fly cutting machine tool for KDP crystal machining and its implementation on the structure design2014
Dr Yan Zhao
Dr Dehong Huo
Element-based knowledge representation in intelligent design and its prototype for knowledge processing2014
Zeyad Al-Shibaany
Dr John Hedley
Dr Dehong Huo
Dr Zhongxu Hu
Micromachining Lithium Niobate for Rapid Prototyping of Resonant Biosensors2014
Dr Dehong Huo
Professor Kenneth Dalgarno
Surface integrity characteristics in micro end milling of monocrystalline silicon2014
Dr Dehong Huo
Diamond turning and micro turning2013
Dr Dehong Huo
Micro Cutting Mechanics2013
Dr Dehong Huo
Micro Tooling Design and Manufacturing2013
Dr Dehong Huo
Micro-Cutting: Fundamentals and Applications2013
Dr Dehong Huo
Preface2013
Dr Dehong Huo
Design and Performance Assessment of a 5-Axis Ultra-precision Micro-milling Machine2012
Dr Dehong Huo
Performance Improvement of the LM Device and Its Application to Precise Measurement of Motion Trajectories within a Small Range with a Machining Centre2012
Dr Dehong Huo
Design of a five-axis ultra-precision micro-milling machine-UltraMill. Part 1: holistic design approach, design considerations and specifications2010
Dr Dehong Huo
Design of a five-axis ultra-precision micro-milling machine-UltraMill. Part 2: integrated dynamic modelling, design optimisation and analysis2010
Dr Dehong Huo
Experimental investigation on micromilling of oxygen-free, high-conductivity copper using tungsten carbide, chemistry vapour deposition, and single-crystal diamond micro tools2010
Dr Dehong Huo
A holistic integrated dynamic design and modeling approach applied to the development of ultraprecision micro milling machines2009
Dr Dehong Huo
Dynamic characteristics of a direct-drive air-bearing slide system with squeeze film damping2009
Dr Dehong Huo
A dynamics-driven approach to the design of precision machine tools for micro-manufacturing and its implementation perspectives2008
Dr Dehong Huo
Performance analysis and optimal design of fast tool servo used for machining microstructured surfaces2008
Dr Dehong Huo
An Investigation of Nanoindentation Tests on the Single Crystal Copper Thin Film via an AFM and MD Simulation2007
Dr Dehong Huo
Modeling and control of two-axis direct drive slides with application to nano/micro machining2007
Dr Dehong Huo
A Dynamics-Driven Approach to Precision Machines Design for Micro-Manufacturing and Its Implementation Perspectives2006
Dr Dehong Huo
Design of a piezo-driven fast tool servo for diamond cutting: dynamics and application perspectives2006
Dr Dehong Huo
Multiscale Simulation on Nanometric Cutting of Single Crystal Copper2006