Toggle Main Menu Toggle Search

Open Access padlockePrints

Browsing publications by Dr Islam Shyha.

Newcastle AuthorsTitleYearFull text
Guoyu Fu
Dr Fuzhong Sun
Dr Dehong Huo
Dr Islam Shyha
Chenggang Fang
et al.
Finite element and experimental studies on the machining process of polymer/graphene nanoplatelet nanocomposites2022
Guoyu Fu
Dr Dehong Huo
Dr Islam Shyha
Dr Fuzhong Sun
Qiang Gao
et al.
Machinability investigation of polymer/GNP nanocomposites in micro-milling2022
Guoyu Fu
Dr Long Jiang
Dr Dehong Huo
Dr Islam Shyha
An experimental investigation on tool wear behaviour of uncoated and coated micro-tools in micro-milling of graphene-reinforced polymer nanocomposites2021
Guoyu Fu
Dr Dehong Huo
Dr Islam Shyha
FE-simulation of machining processes of epoxy with Mulliken Boyce model2021
Dr Islam Shyha
Dr Dehong Huo
Peyman Hesamikojidi
Performance of a new hybrid cutting-abrasive tool for the machining of fibre reinforced polymer composites2021
Dr Dehong Huo
Xiangyu Teng
Dr Islam Shyha
A review on nanocomposites. Part 2: Micromachining2020
Guoyu Fu
Dr Dehong Huo
Dr Islam Shyha
Dr Ketan Pancholi
Experimental investigation on micromachining of epoxy/graphene nano platelet nanocomposites2020
Guoyu Fu
Da Huo
Dr Islam Shyha
Dr Ketan Pancholi
Experimental investigation on micro milling of polyester/halloysite nano-clay nanocomposites2019
Xiangyu Teng
Dr Dehong Huo
Dr Islam Shyha
Dr Wanqun Chen
Dr Eugene Wong
et al.
An experimental study on tool wear behaviour in micro milling of nano Mg/Ti metal matrix composites2018
Dr Islam Shyha
Dr Dehong Huo
Analysis of Microstructure and Chip Formation When Machining Ti-6Al-4V2018
Dr Islam Shyha
Dr Dehong Huo
Guoyu Fu
Analysis of surface quality when micromilling polymer nanocomposites2018
Xiangyu Teng
Dr Wanqun Chen
Dr Dehong Huo
Dr Islam Shyha
Comparison of cutting mechanism when machining micro and nano-particles reinforced SiC/Al metal matrix composites2018
Dr Islam Shyha
Dr Dehong Huo
Experimental analysis of system parameters for minimum cutting fluid consumption when machining Ti-6Al-4V using a novel supply system2018
Xiangyu Teng
Dr Dehong Huo
Dr Wanqun Chen
Dr Eugene Wong
Lu Zheng
et al.
Finite element modelling on cutting mechanism of nano Mg/SiC metal matrix composites considering cutting edge radius2018
Dr Islam Shyha
Dr Dehong Huo
Guoyu Fu
Investigation on micro-slotting of polymer nanocomposites: Cutting forces2018
Dr Islam Shyha
Dr Dehong Huo
Evaluation of a novel controlled cutting fluid impinging supply system when machining titanium alloys2017
Dr Islam Shyha
Dr Dehong Huo
Investigation into the effect of cutting fluid concentration on the machinability of Ti-6Al-4V using vegetable oil-based cutting fluids2017