Publications by Dr Shafiq Odhano - ePrints

Browsing publications by Dr Shafiq Odhano.

Newcastle Authors	Title	Year
Zaynah Ahmad Dr Rafal Wrobel Dr Tom Werner Dr Shafiq Odhano Professor Volker Pickert et al.	A Method for Accurate Measurement of Anisotropic Thermal Conductivity of Impregnated Electrical Windings	2024
Dr Shafiq Odhano Dr Xu Deng Professor Barrie Mecrow	A Review of Modeling and Control of Multi-Phase Induction Motors Under Machine Faults	2024
Zaynah Ahmad Dr Rafal Wrobel Dr Tom Werner Dr Shafiq Odhano Professor Volker Pickert et al.	An Accurate Experimental Approach for Deriving Equivalent Thermal Conductivity of Impregnated Electrical Windings	2023
Dr Shafiq Odhano	Novel Motor-Shaped Rotational Inductor for Motor Drive Applications	2020
Dr Shafiq Odhano	PWM-Based Optimal Model Predictive Control for Variable Speed Generating Units	2020
Dr Shafiq Odhano	Torque Ripple Reduction of PMSMs Using a Novel Angle-Based Repetitive Observer	2020
Dr Shafiq Odhano	A New Position and Speed Estimation Scheme for Position Control of PMSM Drives Using Low-Resolution Position Sensors	2019
Dr Shafiq Odhano	An Accurate Self-Commissioning Technique for Matrix Converters Applied to Sensorless Control of Synchronous Reluctance Motor Drives	2019
Dr Shafiq Odhano	High dynamic performance power quality conditioner for AC microgrids	2019
Dr Shafiq Odhano	Modulated Model Predictive Control for Induction Motor Drives with Sequential Cost Function Evaluation	2019
Dr Shafiq Odhano	Modulated Model-Predictive Control with Optimized Overmodulation	2019
Dr Shafiq Odhano	Parameter Identification and Self-Commissioning in AC Motor Drives: A Technology Status Review	2019
Dr Shafiq Odhano	Reuse of a damaged permanent magnet synchronous motor for torque ripple and acoustic noise elimination using a novel repetitive observer	2019
Dr Shafiq Odhano	Sensorless and modulated model-predictive control for a doubly fed induction machine	2019
Dr Shafiq Odhano	Sequential MPC Strategy for High Performance Induction Motor Drives: A detailed analysis	2019
Dr Shafiq Odhano	A Novel Phase-lock Loop with Feed-back Repetitive Controller for Robustness to Periodic Disturbance in Three-phase Systems	2018
Dr Shafiq Odhano	Analysis and Design of Position and Velocity Estimation Scheme for PM Servo Motor Drive with Binary Hall Sensors	2018
Dr Shafiq Odhano	Identification of Linear Permanent Magnet Synchronous Motor Parameters and Inverter Non-Linearity Effects	2018
Dr Shafiq Odhano	Model Predictive Direct Flux Vector Control of Multi-three-Phase Induction Motor Drives	2018
Dr Shafiq Odhano	Modulated Model Predictive Direct Power Control of DFIM Considering Magnetic Saturation Effects	2018
Dr Shafiq Odhano	Modulated Model Predictive Speed Control for PMSM Drives	2018
Dr Shafiq Odhano	Modulated Optimal Model Predictive Control for Variable Speed Gen-Sets	2018
Dr Shafiq Odhano	MPC Using Modulated Optimal Voltage Vector for Voltage Source Inverter with LC Output Filter	2018
Dr Shafiq Odhano	Non-Intrusive Online Stator Temperature Estimation for Open-End Winding PMSM	2018
Dr Shafiq Odhano	Torque Quality Improvement of an Open-End Winding PMSM	2018
Dr Shafiq Odhano	Direct flux and current vector control for induction motor drives using model predictive control theory	2017
Dr Shafiq Odhano	Identification of Three-Phase IPM Machine Parameters Using Torque Tests	2017
Dr Shafiq Odhano	Model predictive Direct Flux Vector Control of multi three-phase induction motor drives	2017
Dr Shafiq Odhano	Sensorless control of matrix converter-fed synchronous reluctance motor drives	2017
Dr Shafiq Odhano	The design of a position-based repetitive control for speed ripple reduction in PMLSMs	2017
Dr Shafiq Odhano	Design of a repetitive controller as a feed-forward disturbance observer	2016
Dr Shafiq Odhano	Finite control set and modulated model predictive flux and current control for induction motor drives	2016
Dr Shafiq Odhano	Theoretical analysis of the synchronous reactance influence on the speed regulation of PM motors	2016
Dr Shafiq Odhano	Assessment method of dead-time compensation schemes of three-phase inverters using a hardware-in-the-loop configuration	2015
Dr Shafiq Odhano	Experimental fault assessment on multiphase PM generators with fractional-slot concentrated windings	2015
Dr Shafiq Odhano	Identification of the Magnetic Model of Permanent-Magnet Synchronous Machines Using DC-Biased Low-Frequency AC Signal Injection	2015
Dr Shafiq Odhano	Induction motor magnetizing characteristic identification at standstill with single-phase tests conducted through the inverter	2015
Dr Shafiq Odhano	Maximum efficiency per torque direct flux vector control of induction motor drives	2015
Dr Shafiq Odhano	Parameter extraction for three phase IPM machines through simple torque tests	2015
Dr Shafiq Odhano	Parameter identification and self-commissioning of AC permanent magnet machines - A review	2015
Dr Shafiq Odhano	Identification of the magnetic model of permanent magnet synchronous machines using DC-biased low frequency AC signal injection	2014
Dr Shafiq Odhano	Implementation of frequency-modulated triangular carrier and slope PWM strategies for three-level NPC inverters	2014
Dr Shafiq Odhano	Maximum efficiency per torque direct flux vector control of induction motor drives	2014
Dr Shafiq Odhano	Self-commissioning of interior permanent- magnet synchronous motor drives with high-frequency current injection	2014
Dr Shafiq Odhano	Self-commissioning of interior permanent magnet synchronous motor drives with high-frequency current injection	2013
Dr Shafiq Odhano	Unified direct-flux vector control of induction motor drives with maximum torque per ampere operation	2013
Dr Shafiq Odhano	Unified direct-flux vector control of induction motor self-commissioning drive with analysis of parameter detuning effects	2013