Publications by Professor Sudipta Roy - ePrints

Browsing publications by Professor Sudipta Roy.

Newcastle Authors	Title	Year
Dr Susana Silva Martinez Professor Sudipta Roy	Metal recovery from low concentration solutions using a flow-by reactor under galvanostatic approach	2016
Albert Serra Simon Coleman Professor Sudipta Roy	Sono-electrodeposition transfer of micro-scale copper patterns on to A7 substrates using a mask-less method	2016
swati Ghosh Professor Sudipta Roy	Codeposition of Cu-Sn from Ethaline Deep Eutectic Solvent	2015
Eden Dela Pena Professor Sudipta Roy	Effect of additive concentration during copper deposition using EnFACE electrolyte	2015
Dr Naray Pewnim Professor Sudipta Roy	Effect of Fluorosurfactant Additive during Cu-Sn Codeposition from Methanesulfonic Acid	2015
Sarah Johnson-Lynn Professor Sudipta Roy Professor Andrew McCaskie Dr Mark Birch	Electrochemical Modification of Titanium Alloy Influences Osteoblast Morphology and Activity of Cadherin-11 and Rho-Family GTPases	2015
Simon Coleman Professor Sudipta Roy	Electrodeposition of copper patterns using Enface technique under ultrasonic agitation	2015
Naray Pewnim Professor Sudipta Roy	The role of fluorosurfactant on Cu-Sn electrodeposition from methanesulfonic acid	2015
Jeet Varia Dr Asfaw Zegeye Professor Sudipta Roy Sani Yahaya Professor Steve Bull et al.	Shewanella putrefaciens for the remediation of Au³⁺, Co²⁺ and Fe³⁺ metal ions from aqueous systems	2014
Professor Sudipta Roy	Characterization of tin films synthesized from ethaline deep eutectic solvent	2014
Professor Sudipta Roy	Combined pulsing currents and agitation for electrodeposition	2014
Simon Coleman Professor Sudipta Roy	Effect of ultrasound on mass transfer during electrodeposition for electrodes separated by a narrow gap	2014
swati Ghosh Professor Sudipta Roy	Electrochemical and Transport Properties of Ethaline Containing Copper and Tin Chloride	2014
Simon Coleman Professor Sudipta Roy	Electrodeposition of Copper Patterns Using EnFACE Technique under Ultrasonic Agitation	2014
Tri Widayatno Professor Sudipta Roy	Nickel electrodeposition using EnFACE	2014
Jeet Varia Dr Susana Silva Martinez Dr Sharon Velasquez Orta Professor Steve Bull Professor Sudipta Roy et al.	Bioelectrochemical metal remediation and recovery of Au³⁺, Co²⁺ and Fe³⁺ metal ions	2013
Dr Susana Silva Martinez Professor Sudipta Roy	Copper recovery from tin stripping solution: Galvanostatic deposition in a batch-recycle system	2013
swati Ghosh Professor Sudipta Roy	Electrochemical Copper Deposition from an Ethaline-CuCl_2^.2H₂O DES	2013
Professor Sudipta Roy	Electrodeposited Ni and Ni-Co Alloys using Cysteine and Conventional Ultrasound Waves	2013
Naray Pewnim Professor Sudipta Roy	Electrodeposition of tin-rich Cu-Sn alloys from a methanesulfonic acid electrolyte	2013
Dr Mark Birch Samaneh Nouraei Siti Ngalim Professor Andrew McCaskie Professor Sudipta Roy et al.	Effect of electrochemical structuring of Ti6Al4V on osteoblast behaviour in vitro	2012
Professor Sudipta Roy	Formation of Dual Diffusion Layer by Pulse Currents	2012
Professor Sudipta Roy	Pulse Plating	2012
Professor Sudipta Roy	Thermodynamic and Kinetic Considerations for Galvanic Corrosion in Nanomaterials	2012
Peter Smith Professor Sudipta Roy Dr David Swailes David Page John Lawson et al.	A model for the corrosion of steel subjected to synthetic produced water containing sulfate, chloride and hydrogen sulfide	2011
Professor Sudipta Roy Rachel Buckle Shafreeza Sobri	A Process to Recover Copper from Tin-Strip Solutions	2011
Naray PEWNIM Professor Sudipta Roy	Effect of fluorosurfactant on copper-tin reduction from methanesulphonic acid electrolyte	2011
Dr Qibai Wu Dr Todd Green Professor Sudipta Roy	Electrodeposition of microstructures using a patterned anode	2011
Tri Widayatno Professor Sudipta Roy	Electrodeposition of Nickel Pattern without Photolithography	2011
Professor Sudipta Roy	A Process for Manufacturing Micro- and Nano- Devices	2010
Naray Pewnim Professor Sudipta Roy	Analysis of Electrodeposited Tin-Copper Solder Alloys from Methanesulfonic Acid Electrolytes at a Rotating Cylinder Hull Cell	2010
Professor Sudipta Roy	Celebrating Acheivement and Innovation: Contributions to Technological Advancement	2010
Samaneh Nouraei Professor Sudipta Roy	Design of experiments in electrochemical microfabrication	2009
Samaneh Nouraei Professor Sudipta Roy	Design of experiments in electrochemical microfabrication	2009
Professor Sudipta Roy Dr Qibai Wu Professor Andrew McCaskie Huqui Zhang	Effect of electrochemically structured titanium alloys on cell morphology	2009
Professor Sudipta Roy	Electrochemical Fabrication of Nanostructured Compositionally Modulated Metal Multilayers	2009
Professor Sudipta Roy	EnFACE: a maskless process for circuit fabrication	2009
Professor Sudipta Roy	Green Electrodeposition 2	2009
Professor Sudipta Roy	Implementation of gold deposition by pulse currents for optoelectronic devices	2009
Dr Jinju Chen Dr Mark Birch Professor Steve Bull Professor Sudipta Roy	Microstructure and nanomechanical characterization of tissue engineered bone deposited on titanium alloy scaffolds	2009
Dr Jinju Chen Professor Steve Bull Professor Sudipta Roy Professor Ajay Kapoor	Nanoindentation and nanowear study of Sn and Ni-Sn coatings	2009
Professor Sudipta Roy	Simulation and Modelling in Metal Finishing. Electrochemistry and Electrochemical Reactors for Microfabrication	2009
Professor Sudipta Roy Rachel Buckle	The recovery of copper and tin from waste tin stripping solution Part II: Kinetic analysis of synthetic and real process waste	2009
Professor Sudipta Roy Dr David Swailes Delia Page John Lawson	A predictive model for Microbial Induced Corrosion (MIC) in sub-sea production pipelines: Part 1-abiotic corrosion model	2008
Professor Sudipta Roy David Page John Lawson	A Predictive Model for Microbiologically Influenced Corrosion (MIC) in Sub-sea Production Pipelines: Part 1 – Abiotic Corrosion Model	2008
Professor Sudipta Roy	Electrochemical Gold Deposition from Non-Toxic Electrolytes	2008
Samaneh Nouraei Professor Sudipta Roy	Electrochemical Process for Micropattern Transfer Without Photolithography: A Modeling Analysis	2008
Samaneh Nouraei Professor Sudipta Roy	Electrochemical process for micropattern transfer without photolithography: A modeling analysis	2008
Professor Sudipta Roy Rachel Buckle	Electrochemical Recovery of Copper from Tin Strip Solutions: Kinetic Effects	2008
Shafreeza Sobri Professor Sudipta Roy	Growth of electrodeposited gold on glassy carbon from a thiosulphate-sulphite electrolyte	2008
Professor Sudipta Roy	Mass transfer considerations during pulse plating	2008
Dr Jinju Chen Professor Steve Bull Professor Sudipta Roy	Mechanical analysis and in situ structural and morphological evaluation of Ni-Sn alloy anodes for Li ion batteries	2008
Rachel Buckle Professor Sudipta Roy	The recovery of copper and tin from waste tin stripping solution. Part I. Thermodynamic analysis	2008
Barbara Tury Professor Sudipta Roy	Effect of pulse parameters on the passive layer formation on pulse plated Ni-Co alloys	2007
Professor Sudipta Roy	Fabrication of Micro and Nano Structured Materials Using Mask-Less Processes	2007
Professor Sudipta Roy	Fabrication of micro- and nano-structured materials using mask-less processes	2007
Professor Sudipta Roy	I2: Green Electrodeposition	2006
Barbara Tury Professor Sudipta Roy	Ni-Co alloys plated by pulse currents	2006
Dr Todd Green Professor Sudipta Roy	Speciation analysis of Au(I) electroplating baths containing sulfite and thiosulfate	2006
Shafreeza Sobri Professor Sudipta Roy	Studies related to recovery of gold from a spent thiosulphate-sulphite electrolyte using an electrolytic cell	2006
Emeritus Professor Keith Scott Professor Sudipta Roy	A new PtRu anode formed by thermal decomposition for the direct method fuel cell	2005
Professor Sudipta Roy	A Process for Manufacturing Micro- and Nano- Devices	2005
Emeritus Professor Keith Scott Professor Paul Christensen Professor Sudipta Roy	A study of PtRuO2 catalysts thermally formed on titanium mesh for methanol oxidation	2005
Samaneh Nouraei Professor Sudipta Roy	Analysis of Electrochemical Microfabrication Without Photolithography	2005
Shafreeza Sobri Professor Sudipta Roy	Characterisation of a thiosulphate-sulphite gold electrodeposition process	2005
Muzhong Shen Professor Sudipta Roy	Electrochemical characterization of the Pt/PEDOT electrode in DMFC	2005
Shafreeza Sobri Professor Sudipta Roy	Gold electrocrystallization from a spent thiosulfate-sulfite electrolyte	2005
Professor Sudipta Roy Dr Jens Kuhlmann Emeritus Professor Keith Scott	Grafted polymer electrolyte membrane for direct methanol fuel cells	2005
Professor Sudipta Roy	Microscale pattern transfer without photolithography of substrates	2005
Ruth Allen Dr Chan Lim Emeritus Professor Keith Scott Professor Sudipta Roy	Novel anode structure for the direct methanol fuel cell	2005
Muzhong Shen Professor Sudipta Roy Emeritus Professor Keith Scott	Preparation and characterisation of Pt deposition on ion conducting membrane for direct methanol fuel cell electrodes	2005
Professor Sudipta Roy Emeritus Professor Keith Scott	Preparation and Characterisation pf Platinum Deposition on IOn Conducting Membranes as an Alternative to Making Electrodes for Direct Methanol Fuel Cells	2005
Shafreeza Sobri Professor Sudipta Roy	Recovery of Gold from a Spent Thiosulphate-Sulphite Electrolyte Using a Flow-by Cell	2005
Professor Sudipta Roy	The Recovery of Metals from Waste Streams by Electrochemical Methods” Green Electrodeposition Symposium	2005
Dr Lianxi Yang Ruth Allen Emeritus Professor Keith Scott Professor Paul Christensen Professor Sudipta Roy et al.	A comparative study of ptru and ptrusn thermally formed on titanium mesh for methanol electro-oxidation	2004
Dr Alasdair Charles Professor Sudipta Roy	Characterisation of Co-Ni(Cu)/Cu multilayers deposited from a citrate electrolyte in a flow channel cell	2004
Dr Chan Lim Emeritus Professor Keith Scott Ruth Allen Professor Sudipta Roy	Direct methanol fuel cells using thermally catalysed Ti mesh	2004
Dr Alasdair Charles Professor Sudipta Roy	Dissolution from electrodeposited copper-cobalt-copper sandwiches	2004
Dr Wouter Meuleman Professor Sudipta Roy Dr Laszlo Peter	Effect of Current and Potential Waveforms on GMR Characteristics of Electrodeposited Ni(Cu)/Cu Multilayers	2004
Professor Sudipta Roy Emeritus Professor Keith Scott	Development of a non-toxic electrolyte for soft gold electrodeposition: An overview of work at University of Newcastle upon Tyne	2003
Dr Todd Green Professor Sudipta Roy	Electrodeposition of gold from a thiosulfate-sulfite bath for microelectronic applications	2003
Dr Wouter Meuleman Professor Sudipta Roy	Transient electrochemical processes during Cu-Ni deposition	2003
Professor Sudipta Roy	Co-Ni-Cu/Cu multilayers electrodeposited using a channel flow cell	2002
Dr Wouter Meuleman Professor Sudipta Roy Dr Laszlo Peter	Effect of current and potential waveforms on sublayer thickness of electrodeposited copper-nickel multilayers	2002
Professor Sudipta Roy	Flow cell design for metal deposition at recessed circular electrodes and wafers	2001
Dr Todd Green Professor Sudipta Roy Emeritus Professor Keith Scott	Recovery of metal ions from spent solutions used to electrodeposits magnetic materials	2001
David Page Professor Sudipta Roy	A systematic investigation of current efficiency during brass deposition from a pyrophosphate electrolyte using RDE, RCE, and QCM	2000
Dr Wouter Meuleman Professor Sudipta Roy	Electrochemical Characterisation of Copper Deposition from Citrate Solutions	2000
Professor Sudipta Roy	Electrodeposition of gold from a sulphite bath by direct and pulse currents: Applications to opto-electronic devices	2000
Professor Sudipta Roy	Determination of thickness of interfacial layers in electrodeposited GMR metal multilayers	1999