Toggle Main Menu Toggle Search

Open Access padlockePrints

Browsing publications by Professor Kenneth Dalgarno.

Newcastle AuthorsTitleYearFull text
Annachiara Scalzone
Dr Xiao Wang
Professor Kenneth Dalgarno
Dr Ana Ferreira-Duarte
Dr Piergiorgio Gentile
et al.
A Chondrosphere-Based Scaffold Free Approach to Manufacture an In Vitro Articular Cartilage Model2022
Marcin Kotlarz
Dr Ana Ferreira-Duarte
Dr Piergiorgio Gentile
Professor Kenneth Dalgarno
Bioprinting of cell-laden hydrogels onto titanium alloy surfaces to produce a bioactive interface2022
Marcin Kotlarz
Dr Ana Ferreira-Duarte
Dr Piergiorgio Gentile
Professor Kenneth Dalgarno
Droplet-based bioprinting enables the fabrication of cell-hydrogel-microfibre composite tissue precursors2022
Dr Oana Bretcanu
Professor Kenneth Dalgarno
Fabrication of porous apatite-wollastonite glass ceramics using a two steps sintering process2022
Babis Tzivelekis
Dr Matthew Selby
Professor Kenneth Dalgarno
Microfluidic chip fabrication and performance analysis of 3D printed material for use in microfluidic nucleic acid amplification application2021
Joseph Dudman
Dr Ana Ferreira-Duarte
Dr Piergiorgio Gentile
Dr Xiao Wang
Professor Kenneth Dalgarno
et al.
Microvalve Bioprinting of MSC-Chondrocyte Co-Cultures2021
Dr Raasti Naseem
Babis Tzivelekis
Dr Matthew German
Dr Piergiorgio Gentile
Dr Ana Ferreira-Duarte
et al.
Strategies for Enhancing Polyester-Based Materials for Bone Fixation Applications2021
Annachiara Scalzone
Professor Kenneth Dalgarno
Dr Piergiorgio Gentile
3D printed Sr-containing composite scaffolds: Effect of structural design and material formulation towards new strategies for bone tissue engineering2020
Alexander Sieberath
Dr Ana Ferreira-Duarte
Dr Piergiorgio Gentile
Professor Kenneth Dalgarno
A Comparison of Osteoblast and Osteoclast In Vitro Co-Culture Models and Their Translation for Preclinical Drug Testing Applications2020
Dr Priscila Melo
Dr Piergiorgio Gentile
Professor Kenneth Dalgarno
Effects of alumina on the thermal processing of apatite-wollastonite: changes in sintering, microstructure and crystallinity of compressed pellets2020
Babis Tzivelekis
Pavlos Sgardelis
Dr Kevin Waldron
Dr Richard Whalley
Dr Dehong Huo
et al.
Fabrication routes via projection stereolithography for 3D-printing of microfluidic geometries for nucleic acid amplification2020
Dr Huagui Zhang
Dr Richard Whalley
Dr Ana Ferreira-Duarte
Professor Kenneth Dalgarno
High throughput physiological micro-models for in vitro pre-clinical drug testing: a review of engineering systems approaches2020
Dr Priscila Melo
Dr Raasti Naseem
Dr Piergiorgio Gentile
Professor Kenneth Dalgarno
Processing of Sr2+ containing Poly L-Lactic Acid-based hybrid composites for additive manufacturing of bone scaffolds2020
Joseph Dudman
Dr Ana Ferreira-Duarte
Dr Piergiorgio Gentile
Dr Xiao Wang
Dr Matthew Benning
et al.
Reliable inkjet printing of chondrocytes and MSCs using reservoir agitation2020
Dr Kegan McColgan-Bannon
Dr Sarah Upson
Dr Piergiorgio Gentile
Professor Kenneth Dalgarno
Dr Ana Ferreira-Duarte
et al.
Biomimetic Properties of Force-Spun PHBV Membranes Functionalised with Collagen as Substrates for Biomedical Application2019
Nami Okubo
Dr Ahmed Qureshi
Professor Kenneth Dalgarno
Dr Kheng-Lim Goh
Cost-effective microvalve-assisted bioprinter for tissue engineering2019
Zakareya Gamie
Ricardo Da Conceicao Ribeiro
Dr Kenneth Rankin
Professor Kenneth Dalgarno
Mesenchymal stromal cells for bone sarcoma treatment: Roadmap to clinical practice2019
Sylvia Muller
Dr Lindsay Nicholson
Naif ALHARBI
Elena Mancuso
Professor Anne Dickinson
et al.
Osteogenic potential of heterogeneous and CD271-enriched mesenchymal stromal cells cultured on apatite-wollastonite 3D scaffolds2019
Dr Priscila Melo
Dr Ana Ferreira-Duarte
Dr Kevin Waldron
Dr Piergiorgio Gentile
Professor Kenneth Dalgarno
et al.
Osteoinduction of 3D printed particulate and short-fibre reinforced composites produced using PLLA and apatite-wollastonite2019
Dr Priscila Melo
Dr Emma Tarrant
Anthony Townshend
Dr Matthew German
Dr Ana Ferreira-Duarte
et al.
Short phosphate glass fiber - PLLA composite to promote bone mineralization2019
Annachiara Scalzone
Dr Ana Ferreira-Duarte
Professor Kenneth Dalgarno
Dr Piergiorgio Gentile
The interplay between chondrocyte spheroids and mesenchymal stem cells boosts cartilage regeneration within a 3D natural-based hydrogel2019
Dr Ria Toumpaniari
Dr Piergiorgio Gentile
Dr Ana Ferreira-Duarte
Professor Kenneth Dalgarno
Assessment of Migration of Human MSCs through Fibrin Hydrogels as a Tool for Formulation Optimisation2018
Pengfei Duan
Dr Ria Toumpaniari
Dr Simon Partridge
Dr Mark Birch
Professor Steve Bull
et al.
How cell culture conditions affect the microstructure and nanomechanical properties of extracellular matrix formed by immortalized human mesenchymal stem cells: An experimental and modelling study2018
Dr Ana Ferreira-Duarte
Professor Kenneth Dalgarno
Dr Piergiorgio Gentile
Lactose-crosslinked fish gelatin-based porous scaffolds embedded with tetrahydrocurcumin for cartilage regeneration2018
Dr Ana Ferreira-Duarte
Professor Kenneth Dalgarno
Dr Piergiorgio Gentile
Multi-compartment scaffold fabricated via 3D-printing as in vitro co-culture osteogenic model2018
Natacha Rodrigues
Naif ALHARBI
Dr Matthew Benning
Dr Ria Toumpaniari
Elena Mancuso
et al.
Osseointegration of porous apatite-wollastonite and poly(lactic acid) composite structures created using 3D printing techniques2018
Dr Matthew Benning
Professor Kenneth Dalgarno
Proof of Concept of a Novel Combined Consolidation and Transfer Mechanism for Electrophotographic 3D Printing2018
Ricardo da Conceicao Ribeiro
Dr Deepali Pal
Dr Ana Ferreira-Duarte
Dr Piergiorgio Gentile
Dr Matthew Benning
et al.
Reactive jet impingement bioprinting of high cell density gels for bone microtissue fabrication2018
Dr Ria Toumpaniari
Dr Alexey Popov
Dr Michael Duan
Dr Jinju Chen
Professor Kenneth Dalgarno
et al.
Synthesis of bioinspired collagen/alginate/fibrin based hydrogels for soft tissue engineering2018
Dr Yanny Baba Ismail
Dr Oana Bretcanu
Professor Kenneth Dalgarno
The Influence of Scaffold Designs on Cell Seeding Efficiency in Establishing A Three-Dimensional Culture2018
Dr Eugene Wong
Professor Kenneth Dalgarno
An overview of powder granulometry on feedstock and part performance in the selective laser melting process2017
Dr Piergiorgio Gentile
Dr Kegan McColgan-Bannon
Professor Kenneth Dalgarno
Dr Ana Ferreira-Duarte
Biosynthetic PCL-graft-collagen bulk material for tissue engineering2017
Dr Sarah Upson
Professor Kenneth Dalgarno
Dr Ana Ferreira-Duarte
Centrifugally Spun PHBV Micro and Nanofibres2017
Dr Simon Partridge
Dr Matthew Benning
Dr Matthew German
Professor Kenneth Dalgarno
Development of an arthroscopically compatible polymer additive layer manufacture technique2017
Dr Yanny Baba Ismail
Dr Oana Bretcanu
Professor Kenneth Dalgarno
Development of multi-substituted hydroxyapatite nanopowders as biomedical materials for bone tissue engineering applications2017
Elena Mancuso
Dr Oana Bretcanu
Professor Kenneth Dalgarno
Novel bioglasses for bone tissue repair and regeneration: effect of glass design on sintering ability, ion release and biocompatibility2017
Dr Yanny Baba Ismail
Dr Ana Ferreira-Duarte
Dr Oana Bretcanu
Professor Kenneth Dalgarno
Polyelectrolyte multi-layers assembly of SiCHA nanopowders and collagen type I on aminolysed PLA films to enhance cell-material interactions2017
Professor Kenneth Dalgarno
Dr Javier Munguia Valenzuela
Process control testing for fused filament fabrication2017
Elena Mancuso
Dr Oana Bretcanu
Professor Kenneth Dalgarno
Sensitivity of novel silicate and borate-based glass structures on in vitro bioactivity and degradation behaviour2017
Professor Edvaldo Ribeiro Rosa
Dr Deepali Pal
Dr David Jamieson
Dr Kenneth Rankin
Dr Matthew Benning
et al.
Temporary Single Cell Coating for Bioprocessing via a Cationic Polymer2017
Elena Mancuso
Naif ALHARBI
Dr Oana Bretcanu
Dr Mark Birch
Professor Andrew McCaskie
et al.
Three-dimentional printing of porous load bearing bioceramic scaffolds2017
Zakareya Gamie
Dr Emma Haagensen
Ricardo da Conceicao Ribeiro
Professor Kenneth Dalgarno
Dr Anja Krippner-Heidenreich
et al.
TNF-related apoptosis-inducing ligand (TRAIL) for bone sarcoma treatment: Pre-clinical and clinical data2017
Alexander Popov
Dr Bill Scott
Dr Jinju Chen
Professor James Shaw
Professor Kenneth Dalgarno
et al.
3D manufactured islet micro-tissues for the treatment of type-1 diabetes2016
Stephen Akande
Professor Kenneth Dalgarno
Dr Javier Munguia Valenzuela
Assessment of tests for use in process and quality control systems for selective laser sintering of polyamide powders2016
Professor Kenneth Dalgarno
Design and fabrication of 3D-printed anatomically shaped lumbar cage for intervertebral disc (IVD) degeneration treatment2016
Dr Sarah Upson
Dr Simon Partridge
Dr David Fulton
Dr Ian Corbett
Dr Matthew German
et al.
Development of a methacrylate-terminated PLGA copolymer for potential use in craniomaxillofacial fracture plates2016
Natacha Rodrigues
Dr Matthew Benning
Dr Ana Ferreira-Duarte
Dr Luke Dixon
Professor Kenneth Dalgarno
et al.
Manufacture and characterisation of porous PLA scaffolds2016
Professor Kenneth Dalgarno
Percutaneous Vertebroplasty: A New Animal Model2016
Stephen Akande
Professor Kenneth Dalgarno
Dr Javier Munguia Valenzuela
Professor Jari Pallari
Statistical process control application to polymer based SLS process2016
Professor Kenneth Dalgarno
In vivo biocompatibility of custom-fabricated apatite-wollastonite-mesenchymal stromal cell constructs2015
Professor Kenneth Dalgarno
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: processing, microstructure, and properties2015
Khidzir Zakaria
Professor Kenneth Dalgarno
Effect of wire EDM cutting parameters for evaluating of Additive Manufacturing Hybrid Metal Material2015
Dr Ana Ferreira-Duarte
Ricardo da Conceicao Ribeiro
Dr Matthew Benning
Dr Ria Toumpaniari
Professor Kenneth Dalgarno
et al.
Encapsulated Tumoral Cells for Bioprocessing2015
Dr Javier Munguia Valenzuela
Professor Kenneth Dalgarno
Fatigue behaviour of laser sintered Nylon 12 in rotating and reversed bending tests2015
Stephen Akande
Professor Kenneth Dalgarno
Dr Javier Munguia Valenzuela
Low-Cost QA Benchmark for Fused Filament Fabrication2015
Natacha Rodrigues
Dr Matthew Benning
Dr Ana Ferreira-Duarte
Dr Luke Dixon
Professor Kenneth Dalgarno
et al.
Manufacture and characterisation of porous PLA scaffolds2015
Elena Mancuso
Dr Oana Bretcanu
Dr Mark Birch
Professor Kenneth Dalgarno
Novel 3d Printed Bioceramic Scaffolds as In Vitro Models for Bone Tissue Regeneration2015
Dr Dehong Huo
Professor Kenneth Dalgarno
An experimental investigation on micro machining of fine-grained graphite2014
Dr Javier Munguia Valenzuela
Stephen Akande
Professor Kenneth Dalgarno
Compliant flexural behaviour in laser sintered nylon structures: Experimental test and Finite Element Analysis - correlation2014
Dr Javier Munguia Valenzuela
Professor Kenneth Dalgarno
Fatigue behaviour of laser-sintered PA12 specimens under four-point rotating bending2014
Shane Walsh
Professor Kenneth Dalgarno
Dr Mark Birch
Mixed polymer surfaces with controlled microtopography influence mesenchymal stem cell condensation and differentiation2014
Dr Javier Munguia Valenzuela
Professor Kenneth Dalgarno
Personalized foot orthoses with embedded temperature sensing: Proof of concept and relationship with activity2014
Professor Kenneth Dalgarno
Dr Javier Munguia Valenzuela
Quality assurance and process monitoring of fused deposition modelling made parts2014
Dr Dehong Huo
Professor Kenneth Dalgarno
Surface integrity characteristics in micro end milling of monocrystalline silicon2014
Dr Javier Munguia Valenzuela
Professor Kenneth Dalgarno
Ankle foot orthotics optimization by means of composite reinforcement of free-form structures2013
Professor Kenneth Dalgarno
Dr Javier Munguia Valenzuela
Quality assurance and process monitoring of fused deposition modelling made parts2013
Dr Javier Munguia Valenzuela
Professor Kenneth Dalgarno
A-footprint: Ankle and foot orthotic personalization via rapid manufacturing2012
Dr Javier Munguia Valenzuela
Professor Kenneth Dalgarno
Embracing additive manufacture: implications for foot and ankle orthosis design2012
Dr Javier Munguia Valenzuela
Professor Kenneth Dalgarno
Fatigue behavior of additive manufacturing parts. A preliminary analysis2012
Khidzir Zakaria
Professor Kenneth Dalgarno
Influence of Distortion on Part Accuracy for Indirect Metal Laser Sintering2012
Professor Kenneth Dalgarno
Laser sintering of blended Al-Si powders2012
Professor Kenneth Dalgarno
Dr Matthew German
Using additive manufactured tooling in the fabrication of poly (L-Lactide-co-Glycolide) implants2012
Professor Kenneth Dalgarno
Densification mechanism and microstructural evolution in selective laser sintering of Al-12Si powders2011
Professor Kenneth Dalgarno
Cost and benefit analysis of Fused Deposition Modelling (FDM) technique and Selective Laser Sintering (SLS) for fabrication of customised foot orthoses2010
Professor Kenneth Dalgarno
Design and manufacture of injection mould tool inserts produced using indirect SLS and machining processes2010
Professor Kenneth Dalgarno
Design of customised bioceramic medical implants by layered manufacturing2010
Professor Kenneth Dalgarno
Mass Customization of Foot Orthoses for Rheumatoid Arthritis Using Selective Laser Sintering2010
Professor Kenneth Dalgarno
Spheroidisation and oxide disruption phenomena in direct selective laser melting (SLM) of pre-alloyed Al-Mg and Al-Si powders2009
Thomas Patterson
Professor Kenneth Dalgarno
Using discrete event simulation to redesign manufacturing systems in small manufacturing firms2009
Khidzir Zakaria
Professor Kenneth Dalgarno
Assessment of the manufacture of complex metal parts using indirect selective laser sintering2008
Khidzir Zakaria
Professor Kenneth Dalgarno
Assessment the Manufacture of Complex Metal Parts using Indirect Selective Laser Sintering2008
Professor Kenneth Dalgarno
Comparison between direct and indirect laser sintering of metals2008
Jumani Jumani
Professor Kenneth Dalgarno
Development of rapid manufacturing based mass customisation system for foot orthoses2008
Professor Kenneth Dalgarno
Indirect selective laser sintering of apatite-wollostonite glass-ceramic2008
Professor Kenneth Dalgarno
Mass customisation of foot orthoses for rheumatoid arthritis2008
Jumani Jumani
Professor Kenneth Dalgarno
Process Modelling of Rapid Manufacturing Based Mass Customisation System for Foot Orthoses2008
Professor Kenneth Dalgarno
Processing and characterization of apatite-wollastonite porous scaffolds for bone tissue engineering2008
Ahmad Kamil
Professor Kenneth Dalgarno
The effects of heat treatment on the mechanical properties of laser sintered product material2008
Professor Kenneth Dalgarno
Biological evaluation of an apatite–mullite glass-ceramic produced via selective laser sintering2007
Professor Kenneth Dalgarno
Development of bespoke bone scaffolds using mesenchymal stem cells and bioceramics2007
James Dyson
Professor Kenneth Dalgarno
Development of custom-built bone scaffolds using mesenchymal stem cells and apatite-wollastonite glass-ceramics2007
Professor Kenneth Dalgarno
Effect of Processing Parameters on the Density and Microstructure of Direct Laser Sintered Al-12Si Powders2007
James Dyson
Professor Kenneth Dalgarno
Manufacture and characterisation of bioceramic tissue engineering scaffolds produced by selective laser sintering2007
Professor Kenneth Dalgarno
Manufacture of production quality injection mold tools using SLS and HSM2007
Professor Kenneth Dalgarno
Mass customisation of foot orthoses for rheumatoid arthritis2007
Ahmad Kamil
Professor Kenneth Dalgarno
Material Model for Design Analysis of Laser Sintered Products2007
Professor Kenneth Dalgarno
Materials Research to Support High Performance RM Parts2007
Professor Kenneth Dalgarno
Processing polyamide/hectorite clay nanocomposite using SLS2007
Professor Kenneth Dalgarno
Selective Laser Sintering of Polymer Nanocomposites2007
Thomas Patterson
Professor Kenneth Dalgarno
Using Discrete Element Simulation to Design and Evolve Agile Manufacturing Systems in an SME2007
Professor Kenneth Dalgarno
Delivering mass-produced bespoke and appealing products2006
Professor Kenneth Dalgarno
Indirect selective laser sintering of an apatite–mullite glass–ceramic for potential use in bone replacement applications2006
Professor Kenneth Dalgarno
Mass Customisation of Medical Devices and Implants: State of the Art and Future Directions2006
Professor Kenneth Dalgarno
Metal-electroceramic bonding in PZT through the selective application of laser energy2006
Professor Kenneth Dalgarno
Delivering mass-produced bespoke and appealing products2005
Professor Kenneth Dalgarno
Development of bioactice glass-ceramics for use with the selective laser sintering (SLS) process2005
Professor Kenneth Dalgarno
Mass customisation of foot orthosis for rheumatoid arthritis2005
Professor Kenneth Dalgarno
Mass customisation of medical devices and implants: state of the art and future directions2005
Professor Kenneth Dalgarno
James Dyson
Mechanical properties and biological responses of bioactive glass ceramics processed using indirect SLS2005
Professor Kenneth Dalgarno
Mechanical properties and isotropic behaviour investigation of selective laser sintering2005
Professor Kenneth Dalgarno
Processing of an apatite-mullite glass-ceramic and an hydroxyapatite/phosphate glass composite by selective laser sintering2005
Professor Kenneth Dalgarno
Production of plastic injection mould tools using selective laser sintering and high speed machining2005
Professor Kenneth Dalgarno
Selective laser sintering of apatite-wollastonite glass ceramics2005
Professor Kenneth Dalgarno
Selective laser sintering of glass ceramics for bone replacement applications2005
Professor Kenneth Dalgarno
Comparison of direct and indirect selective laser sintering of porous apatite mullite glass ceramics2004
Professor Kenneth Dalgarno
Compression testing of layered manufactured metal parts: the RAPTIA compression benchmark2004
Professor Kenneth Dalgarno
Layer manufacturing of porous bioactive glass-ceramics using selective laser sintering2004
Professor Kenneth Dalgarno
Metal-electroceramic bonding through the selective application of laser energy2004
Professor Kenneth Dalgarno
Processing conditions and mechanical properties of high speed steel parts fabricated using direct selective laser sintering2003
Professor Kenneth Dalgarno
Producing porous glass-ceramic implants by SLS for bone replacement applications2003
Professor Kenneth Dalgarno
A comparison of the strength, accuracy and build rate of indirect and direct selective laser sintering2002
Professor Kenneth Dalgarno
Analysis of the influence of viscoelasticity in curl development in SLS2002
Professor Kenneth Dalgarno
Finite element analysis of residual stresses and deformations in direct metal SLS2002
Professor Kenneth Dalgarno
Flexible tubular replicas of abdominal aortic aneurysms2002
Professor Kenneth Dalgarno
Numerical simulation of direct metal laser sintering process2002
Professor Kenneth Dalgarno
Selective laser sintering of bio-active glass ceramics2002
Professor Kenneth Dalgarno
Approaches to processing metals and ceramics through the laser scanning of powder beds - a review2001
Professor Kenneth Dalgarno
Direct selective laser sintering of high speed steel2001
Professor Kenneth Dalgarno
Failures in rubber bonding to substrates2001
Professor Kenneth Dalgarno
Improved productivity in elastomer compound transfer moulding through the use of conformal heating2001
Professor Kenneth Dalgarno
Investigation into the direct laser sintering of bioactive glass ceramics2001
Professor Kenneth Dalgarno
Layer manufactured production tooling for elastomer compound transfer moulding incorporating conformal heating channels2001
Professor Kenneth Dalgarno
Manufacture of production injection mould tooling incorporating conformal cooling channels via indirect selective laser sintering2001
Professor Kenneth Dalgarno
Production grade tooling via rapid manufacture2001
Professor Kenneth Dalgarno
Production tooling for polymer components via the DTM Rapidsteel process2001
Professor Kenneth Dalgarno
The UK Navy RAMP Project: improving the spares provisioning process through the rapid acquisition of manufactured parts2001
Professor Kenneth Dalgarno
Cost benefit analysis of production injection mould tools manufactured through indirect SLS2000
Professor Kenneth Dalgarno
Production tooling for polymer components via the DTM Rapidsteel process2000
Professor Kenneth Dalgarno
Strength of the DTM Rapid Steel 1.0 material1999
Professor Kenneth Dalgarno
Tangential slip noise of V-ribbed belts1999