Dr Mehmet Kulan
Professor Nick Baker
| Power Analysis in an SMC-Based Aerospace Transverse Flux Generator for Different Load and Speed Conditions | 2025 |
|
Dr Mehmet Kulan
Professor Nick Baker
| Fast Analytical Force Estimation in Active Magnetic Bearings using a Magnetic Equivalent Circuit Model | 2023 |
|
Dr Mehmet Kulan
Professor Nick Baker
| Improved Core Loss Calculations in Soft Magnetic Composites Considering 3-D Magnetic Flux Density Vectors and Geometry Dependent Eddy Currents | 2023 |
|
Víctor Ballestín Bernad
Dr Mehmet Kulan
Professor Nick Baker
| Loss analysis of a soft magnetic composite transverse flux machine | 2023 |
|
Dr Mehmet Kulan
Professor Nick Baker
| A mechanical flux weakening method via split rotor in permanent magnet aerospace alternators | 2022 |
|
Dr Ramin Moeini Korbekandi
Professor Nick Baker
Dr Mehmet Kulan
Aslan Jalal
| Dynamic Characteristics and Demonstration of an Integrated Linear Engine Generator with Alternative Electrical Machines | 2022 |
|
Dr Mehmet Kulan
Professor Nick Baker
Dr Alexander Korsunsky
| Empirical Implementation of the Steinmetz Equation to Compute Eddy Current Loss in Soft Magnetic Composite Components | 2022 |
|
Dr Mehmet Kulan
Professor Nick Baker
| Impact of Manufacturing and Material Uncertainties in Performance of a Transverse Flux Machine for Aerospace | 2022 |
|
Professor Nick Baker
Dr Mehmet Kulan
Dan Gumbleton-Wood
| Practical loss prediction in soft magnetic composite components | 2022 |
|
Professor Nick Baker
Dr Mehmet Kulan
| Modelling and build of an integrated linear engine generator designed for power density | 2021 |
|
Dr Mehmet Kulan
Professor Nick Baker
| A High Speed Fault Tolerant Transverse Flux Alternator for Aerospace | 2020 |
|
Dr Mehmet Kulan
Professor Nick Baker
| A Methodical Approach to Determine Important Thermal Parameters of a Permanent Magnet Alternator | 2020 |
|
Dr Mehmet Kulan
Samet Şahin
Professor Nick Baker
| An Overview of Modern Thermo-conductive Materials for Heat Extraction in Electrical Machines | 2020 |
|
Dr Mehmet Kulan
Professor Nick Baker
| Manufacturing challenges of a modular transverse flux alternator for aerospace | 2020 |
|
Dr Mehmet Kulan
Professor Nick Baker
| Development of a Thermal Equivalent Circuit to Quantify the Effect of Thermal Paste on Heat Flow through a Permanent Magnet Alternator | 2019 |
|
Dr Mehmet Kulan
Professor Nick Baker
| Life-time characteristics of random wound compressed stator windings under thermal stress | 2019 |
|
Dr Mehmet Kulan
Professor Nick Baker
| Split Rotor Concept for Permanent Magnet Electrical Machines | 2019 |
|
Dr Mehmet Kulan
Professor Nick Baker
| Design and Analysis of a Fault Tolerant Permanent Magnet Alternator for Aerospace | 2018 |
|
Professor Nick Baker
Daniel Smith
Dr Mehmet Kulan
| Design and Performance of a Segmented Stator Permanent Magnet Alternator for Aerospace | 2018 |
|
Dr Mehmet Kulan
Dr Rafal Wrobel
| Estimation of Equivalent Thermal Conductivity for Electrical Windings with High Conductor Fill Factor | 2018 |
|
Professor Jan Illing
Dr Sally Corbett
Dr Amelia Kehoe
Dr Madeline Carter
Dr Hannah Hesselgreaves
et al. | How does the education and training of health and social care staff transfer to practice and benefit patients? A realist approach. Final Report for Department of Health | 2018 |
|
Emerita Professor Jan Illing
Dr Sally Corbett
Dr Amelia Kehoe
Dr Madeline Carter
Dr Hannah Hesselgreaves
et al. | How does the education of health and social care staff lead to patient benefit: a realist synthesis | 2018 |
|
Yaohui Gai
Mohammad Kimiabeigi
Dr Mehmet Kulan
Dr James Widmer
Dr Andrew Steven
et al. | Pressure Loss Modelling in a Water-Cooled Hollow-Shaft Rotor for an Automotive Traction Motor | 2018 |
|
Dr Mehmet Kulan
Professor Nick Baker
| Thermal Aging Investigation of Random Wound Compressed Stator Windings | 2018 |
|
Dr Mehmet Kulan
Professor Nick Baker
| A Thermal Equivalent Circuit to Quantify the Effect of Thermal Paste on Heat Flow Through a PM Machine | 2017 |
|
Dr Mehmet Kulan
Professor Nick Baker
Dr James Widmer
| Design and Analysis of Compressed Windings for a Permanent Magnet Integrated Starter Generator | 2017 |
|
Professor Jan Illing
Dr Sally Corbett
Dr Madeline Carter
Dr Amelia Kehoe
Dr Hannah Hesselgreaves
et al. | How does the education and training of health and social care staff lead to patient benefit? A realist synthesis. Interim report for the Department of Health. | 2017 |
|
Dr Charlotte Rothwell
Dr Madeline Carter
Dr Mehmet Kulan
Dr Amelia Kehoe
Professor Jan Illing
et al. | Newcastle University MBBS Curriculum Renewal 2017 Report for Newcastle Medical School | 2017 |
|
Dr Madeline Carter
Dr Charlotte Rothwell
Dr Mehmet Kulan
Dr Amelia Kehoe
Professor Jan Illing
et al. | Newcastle University MBBS curriculum renewal: Report on stakeholder views | 2017 |
|
Dr Bryan Burford
Dr Mehmet Kulan
Dr Madeline Carter
Dr Paul Tiffin
Professor Gill Vance
et al. | The Health Education Quality Framework and National Education and Training Survey: Evidence, Evaluation and Pilot | 2017 |
|
Dr Bryan Burford
Dr Mehmet Kulan
Dr Madeline Carter
Dr Paul Tiffin
Professor Gill Vance
et al. | The Health Education Quality Framework and National Education and Training Survey: Evidence, Evaluation and Pilot. Final report for Health Education England | 2017 |
|
Professor Nick Baker
Dr Mehmet Kulan
| Design and performance of a Segmented Stator Permanent Magnet Alternator for Aerospace | 2016 |
|
Dr Mehmet Kulan
Professor Nick Baker
Dr James Widmer
| Design of a high fill factor permanent magnet integrated starter generator with compressed stator windings | 2016 |
|
Professor Jan Illing
Dr Sally Corbett
Dr Madeline Carter
Dr Hannah Hesselgreaves
Dr Amelia Kehoe
et al. | Education Outcomes Framework: Developing indictors and the evidence base. Interim Report for the Department of Health | 2016 |
|
Dr Mehmet Kulan
Professor Nick Baker
Dr James Widmer
Dr Simon Lambert
| Modelling the Mechanical and Thermal Properties of Compressed Stator Windings | 2016 |
|
