Dr Ehsan Farahani
Professor Nick Baker
| Analysis of a Flux-concentrated V-type Biased-Flux Slot Motor | 2025 |
|
Dr Farshid Mahmouditabar
Professor Nick Baker
| Robust Design of Induction Machines for High-Speed Electric Freight Locomotive Applications | 2025 |
|
Professor Nick Baker
| Analysis of a New Asymmetric Biased-Flux Operation for an Inter-Modular Permanent Magnet Motor | 2024 |
|
Farrel Asker
Professor Nick Baker
| Analysis of the effect of friction on the efficiency calculations of an electric machine for a wave energy converter | 2024 |
|
Dr Farshid Mahmouditabar
Professor Nick Baker
| Design Optimization of Induction Motors with Different Stator Slot Rotor Bar Combinations Considering Drive Cycle | 2024 |
|
Dr Ehsan Farahani
Professor Nick Baker
| Investigation of a low speed tubular linear generator with inter-modular permanent magnets | 2024 |
|
Dr Ehsan Farahani
Professor Nick Baker
| Investigation of alternative magnet configurations in a biased-flux machine | 2024 |
|
Dr Ramin Moeini Korbekandi
Professor Nick Baker
| Performance evaluation of linear variable valve actuation for a linear engine generator | 2024 |
|
Dr Mehmet Kulan
Professor Nick Baker
| Power Analysis in an SMC-Based Aerospace Transverse Flux Generator for Different Load and Speed Conditions | 2024 |
|
Dr Farshid Mahmouditabar
Professor Nick Baker
| Robust Design of a Six-Phase Segmented Switch Reluctance Motor Considering Manufacturing Tolerances and Manufacturing Processes | 2024 |
|
Dr Ehsan Farahani
Professor Nick Baker
| Split Yoke-Permanent Magnet Biased-Flux Motor | 2024 |
|
Dr Farshid Mahmouditabar
Professor Nick Baker
| The Effect of Winding Configuration on the Performance of Six-Phase Segmented Switch Reluctance Motor | 2024 |
|
Professor Nick Baker
| A closed-loop linear engine generator using inert gases: A performance and exergy study | 2023 |
|
Dr Ehsan Farahani
Professor Nick Baker
Dr Farshid Mahmouditabar
| An Innovative H-Type Flux Switching Permanent Magnet Linear Generator for Thrust Force Enhancement | 2023 |
|
Professor Nick Baker
Dr Serkan Turkmen
Dr Chang Li
| Biofilm prevention in the generator of a direct drive wave energy converter | 2023 |
|
Dr Chang Li
Dr Serkan Turkmen
Professor Nick Baker
Dr John Finlay
Emmet Ryan
et al. | Biofilm prevention in the generator of a direct drive wave energy converter | 2023 |
|
Farrel Asker
Professor Nick Baker
| Comparison of optimisation methods for power take off design in a wave energy converter | 2023 |
|
Professor Nick Baker
Dr Lewis Chambers
Dr Serkan Turkmen
| Design of an integrated generator and heaving buoy | 2023 |
|
Professor Nick Baker
Dr Ehsan Farahani
Dr Farshid Mahmouditabar
| Design of an outer-translator flux switching linear generator for use in a heaving wave energy converter | 2023 |
|
Dr Lewis Chambers
Professor Nick Baker
| Designing an Integrated Generator for a Wave Energy Converter | 2023 |
|
Dr Mehmet Kulan
Professor Nick Baker
| Fast Analytical Force Estimation in Active Magnetic Bearings using a Magnetic Equivalent Circuit Model | 2023 |
|
Dr Mehmet Kulan
Professor Nick Baker
| Improved Core Loss Calculations in Soft Magnetic Composites Considering 3-D Magnetic Flux Density Vectors and Geometry Dependent Eddy Currents | 2023 |
|
Víctor Ballestín Bernad
Dr Mehmet Kulan
Professor Nick Baker
| Loss analysis of a soft magnetic composite transverse flux machine | 2023 |
|
Dr Ehsan Farahani
Professor Nick Baker
Dr Farshid Mahmouditabar
| Performance Analysis and Optimization of a H-type Flux Switching Linear Generator for Wave Energy Converters | 2023 |
|
Dr Mehmet Kulan
Professor Nick Baker
| A mechanical flux weakening method via split rotor in permanent magnet aerospace alternators | 2022 |
|
Professor Nick Baker
| Design, build and testing of an integrated compressor-generator | 2022 |
|
Dr Lewis Chambers
Professor Nick Baker
| Developing a direct drive generator for a heaving IPS buoy | 2022 |
|
Professor Nick Baker
Dr Lewis Chambers
| Developing a direct drive power take off for the mocean wave energy converter | 2022 |
|
Professor Nick Baker
Ahmed Almoraya
| Development and Wave Tank Demonstration of a Fully Controlled Permanent Magnet Drive for a Heaving Wave Energy Converter | 2022 |
|
Professor Nick Baker
Dr Lewis Chambers
Farrel Asker
| Development of a Direct Drive Power Take Off System for a hinged wave energy converter | 2022 |
|
Dr Ramin Moeini Korbekandi
Professor Nick Baker
Dr Mehmet Kulan
Aslan Jalal
| Dynamic Characteristics and Demonstration of an Integrated Linear Engine Generator with Alternative Electrical Machines | 2022 |
|
Dr Mehmet Kulan
Professor Nick Baker
Dr Alexander Korsunsky
| Empirical Implementation of the Steinmetz Equation to Compute Eddy Current Loss in Soft Magnetic Composite Components | 2022 |
|
Dr Mehmet Kulan
Professor Nick Baker
| Impact of Manufacturing and Material Uncertainties in Performance of a Transverse Flux Machine for Aerospace | 2022 |
|
Professor Nick Baker
Dr Serkan Turkmen
Dr Chang Li
| Marinisation of direct drive generators for wave energy converters | 2022 |
|
Professor Nick Baker
Dr Mehmet Kulan
Dan Gumbleton-Wood
| Practical loss prediction in soft magnetic composite components | 2022 |
|
Professor Nick Baker
| A study of a speed amplified linear generator for low-frequency wave energy conversion | 2021 |
|
Dr Lewis Chambers
Professor Nick Baker
Professor Edward Spooner
| Comparison of the Flux Reversal and Vernier Hybrid Machine for a Hinged Wave Energy Converter | 2021 |
|
Professor Nick Baker
Dr Stephen McDonald
Ahmed Almoraya
| Development and Testing of a Small Scale Wave Energy Converter and Fully Controlled Linear Electric Generator | 2021 |
|
Professor Nick Baker
Dr Mehmet Kulan
| Modelling and build of an integrated linear engine generator designed for power density | 2021 |
|
Dr Mehmet Kulan
Professor Nick Baker
| A High Speed Fault Tolerant Transverse Flux Alternator for Aerospace | 2020 |
|
Dr Mehmet Kulan
Professor Nick Baker
| A Methodical Approach to Determine Important Thermal Parameters of a Permanent Magnet Alternator | 2020 |
|
Dr Mehmet Kulan
Samet Şahin
Professor Nick Baker
| An Overview of Modern Thermo-conductive Materials for Heat Extraction in Electrical Machines | 2020 |
|
Raihan Raihan
Professor Nick Baker
Dr Kristopher Smith
| Development and Testing of a Novel Cylindrical Permanent Magnet Linear Generator | 2020 |
|
Professor Nick Baker
Professor Barrie Mecrow
| Manufacture and Testing of an in-wheel Halbach Array Motor for Automotive Traction | 2020 |
|
Dr Mehmet Kulan
Professor Nick Baker
| Manufacturing challenges of a modular transverse flux alternator for aerospace | 2020 |
|
Iago Martinez Ocaña
Professor Nick Baker
Professor Barrie Mecrow
| Testing of an in-wheel Halbach array motor | 2020 |
|
Professor Nick Baker
Ahmed Almoraya
| A Cylindrical Linear Permanent Magnet Vernier Hybrid Machine for Wave Energy | 2019 |
|
Professor Nick Baker
| A Novel Topology and Control System for Interconnected Wave Energy Converters (IWECs) | 2019 |
|
Professor Nick Baker
Dr Dawei Wu
| A study of translator length in a tubular linear electrical machine designed for use in a linear combustion joule engine | 2019 |
|
Professor Nick Baker
Dr Dawei Wu
Aslan Jalal
| An Investigation of Short Translator Linear Machines for Use in a Free Piston | 2019 |
|
Professor Nick Baker
| An overview on PM linear machines and its application in electrical power generation | 2019 |
|
Iago Martinez Ocaña
Professor Barrie Mecrow
Professor Nick Baker
| Comparison of Parallel Slots Against Parallel Teeth in an In-Wheel Halbach Array Motor | 2019 |
|
Ahmed Almoraya
Professor Nick Baker
Dr Kristopher Smith
Raihan Raihan
| Design and Analysis of a Flux Concentrated Linear Vernier Hybrid Machine with Consequent Poles | 2019 |
|
Dr Mehmet Kulan
Professor Nick Baker
| Development of a Thermal Equivalent Circuit to Quantify the Effect of Thermal Paste on Heat Flow through a Permanent Magnet Alternator | 2019 |
|
Raihan Raihan
Professor Nick Baker
Dr Kristopher Smith
Ahmed Almoraya
| Development of low translator mass linear Vernier machine for wave energy power take off | 2019 |
|
Professor Nick Baker
Ahmed Almoraya
Raihan Raihan
Dr Stephen McDonald
Professor Volker Pickert
et al. | Electric drive train design for wave energy converters | 2019 |
|
Dr Stephen McDonald
Professor Nick Baker
Professor Volker Pickert
| High-frequency current source converter for a direct drive powertrain in a wave energy converter | 2019 |
|
Ahmed Almoraya
Raihan Raihan
Professor Nick Baker
| Investigation into linear generators with integrated magnetic gear for wave energy power take off | 2019 |
|
Professor Nick Baker
Liam Naugher
| Large direct drive generators: the induction machine as an alternative to permanent magnet machines | 2019 |
|
Dr Mehmet Kulan
Professor Nick Baker
| Life-time characteristics of random wound compressed stator windings under thermal stress | 2019 |
|
Dr Stephen McDonald
Professor Nick Baker
Professor Volker Pickert
| Power-take-off topology comparison for a wave energy converter | 2019 |
|
Dr Mehmet Kulan
Professor Nick Baker
| Split Rotor Concept for Permanent Magnet Electrical Machines | 2019 |
|
Professor Nick Baker
| A Linear Laminated Cylindrical Transverse Flux Machine for use with a Free Piston Engine | 2018 |
|
Ahmed Almoraya
Professor Nick Baker
Dr Kristopher Smith
Raihan Raihan
| A New Configuration of a Consequent Pole Linear Vernier Hybrid Machine with V-shape Magnets | 2018 |
|
Junnan Wang
Professor Nick Baker
| A study of the assembly, build and test of a lineartransverse flux machine | 2018 |
|
Professor Nick Baker
Dr Steven Jordan
| Comparison of Two Transverse Flux Machines for an Aerospace Application | 2018 |
|
Dr Mehmet Kulan
Professor Nick Baker
| Design and Analysis of a Fault Tolerant Permanent Magnet Alternator for Aerospace | 2018 |
|
Professor Nick Baker
Daniel Smith
Dr Mehmet Kulan
| Design and Performance of a Segmented Stator Permanent Magnet Alternator for Aerospace | 2018 |
|
Raihan Raihan
Professor Nick Baker
Dr Kristopher Smith
Ahmed Almoraya
| Development and Testing of a Novel Cylindrical Permanent Magnet Linear Generator | 2018 |
|
Professor Nick Baker
Raihan Raihan
Ahmed Almoraya
| Evaluating Alternative Linear Vernier Hybrid Machine Topologies for Integration into Wave Energy Converters | 2018 |
|
Professor Nick Baker
Aslan Jalal
Junnan Wang
| Experimental comparison of two linear machines developed for the free piston engine | 2018 |
|
Ahmed Almoraya
Professor Nick Baker
Dr Kristopher Smith
Raihan Raihan
| Flux Concentrated Doubly Salient Linear Permanent Magnet Machine | 2018 |
|
Iago Martinez Ocaña
Professor Nick Baker
Professor Barrie Mecrow
| Halbach Array for an In-Wheel Traction Motor | 2018 |
|
Raihan Raihan
Professor Nick Baker
Dr Kristopher Smith
Ahmed Almoraya
| Linear consequent pole Halbach array flux reversal machine | 2018 |
|
Professor Nick Baker
Aslan Jalal
| Performance of a tubular machine driven by an external-combustion free piston engine | 2018 |
|
Dr Mehmet Kulan
Professor Nick Baker
| Thermal Aging Investigation of Random Wound Compressed Stator Windings | 2018 |
|
Iago Martinez Ocaña
Professor Nick Baker
Professor Barrie Mecrow
| Transverse flux machines as an alternative to radial flux machines in an in-wheel motor | 2018 |
|
Dr Dawei Wu
Aslan Jalal
Professor Nick Baker
| A Coupled Model of the Linear Joule Engine with Embedded Tubular Permanent Magnet Linear Alternator | 2017 |
|
Dr Mehmet Kulan
Professor Nick Baker
| A Thermal Equivalent Circuit to Quantify the Effect of Thermal Paste on Heat Flow Through a PM Machine | 2017 |
|
Raihan Raihan
Professor Nick Baker
Dr Kristopher Smith
Ahmed Almoraya
| An E-core linear veriner hybrid permanent magnet machine with segmented translator for direct drive wave energy converter | 2017 |
|
Ahmed Almoraya
Professor Nick Baker
Dr Kristopher Smith
Raihan Raihan
| An investigation of a Linear Flux Switching Machine with Tapered Ferromagnetic Poles | 2017 |
|
Dr Steven Jordan
Professor Nick Baker
| Comparison of two transverse flux machines for an aerospace application | 2017 |
|
Dr Steven Jordan
Professor Nick Baker
Dr Jamie Washington
Glynn Atkinson
Ed Pinguey
et al. | Construction methods for modulated pole machines | 2017 |
|
Dr Mehmet Kulan
Professor Nick Baker
Dr James Widmer
| Design and Analysis of Compressed Windings for a Permanent Magnet Integrated Starter Generator | 2017 |
|
Ahmed Almoraya
Professor Nick Baker
Dr Kristopher Smith
Raihan Raihan
| Development of a double-sided consequent pole linear vernier hybrid permanent-magnet machine for wave energy converters | 2017 |
|
Professor Nick Baker
Raihan Raihan
Ahmed Almoraya
| Electric Machine Design for Wave Energy Converters | 2017 |
|
Aslan Jalal
Professor Nick Baker
Dr Dawei Wu
| Electrical Machine Design for use in an External Combustion Free Piston Engine | 2017 |
|
Dr Stephen McDonald
Professor Volker Pickert
Professor Nick Baker
| High-Efficiency Current-Source Converter for All-Electric Wave Energy Conversion Systems | 2017 |
|
Dr Stephen McDonald
Professor Volker Pickert
Professor Nick Baker
| High-Efficiency Current-Source Converter for All-Electric Wave Energy Conversion Systems | 2017 |
|
Raihan Raihan
Professor Nick Baker
Dr Kristopher Smith
Ahmed Almoraya
| Investigation of a Doubly Salient Halbach Array Linear Permanent Magnet Machine for Wave Energy Converters | 2017 |
|
Aslan Jalal
Professor Nick Baker
Di Wu
| The effect of power converter on the design of a Linear Alternator for use with a Joule Cycle-Free Piston Engine | 2017 |
|
Professor Nick Baker
| A comparison of alternative linear machines for use with a direct drive free piston engine | 2016 |
|
Dr Dawei Wu
Aslan Jalal
Professor Nick Baker
| A coupled model of the Linear Joule Engine integrated with a tubular permanent magnet linear alternator | 2016 |
|
Dr Steven Jordan
Professor Nick Baker
| Air-Cooled, High Torque Machines for Aerospace Applications | 2016 |
|
Professor Nick Baker
Mohammad Raihan
| All electric drive train for wave energy power take off | 2016 |
|
Dr Steven Jordan
Professor Nick Baker
| Design and Build of a Mass Critical, Air-cooled Transverse Flux Machine for Aerospace | 2016 |
|
Professor Nick Baker
Dr Mehmet Kulan
| Design and performance of a Segmented Stator Permanent Magnet Alternator for Aerospace | 2016 |
|
Dr Mehmet Kulan
Professor Nick Baker
Dr James Widmer
| Design of a high fill factor permanent magnet integrated starter generator with compressed stator windings | 2016 |
|
Aslan Jalal
Professor Nick Baker
Dr Dawei Wu
| Design of tubular Moving Magnet Linear Alternator for use with an External Combustion - Free Piston Engine | 2016 |
|
Liam Naugher
Professor Nick Baker
Dr Glynn Atkinson
| Large air gap squirrel cage induction generator for a tidal turbine | 2016 |
|
Dr Mehmet Kulan
Professor Nick Baker
Dr James Widmer
Dr Simon Lambert
| Modelling the Mechanical and Thermal Properties of Compressed Stator Windings | 2016 |
|
Zheng Tan
Professor Nick Baker
Dr Wenping Cao
| Novel Optimisation Algorithm of Electrical Machines | 2016 |
|
Professor Nick Baker
Junnan Wang
Dr Glynn Atkinson
| Optimization and Comparison of Linear Transverse Flux and Flux Switching Machines | 2016 |
|
Dr Jamie Washington
Dr Glynn Atkinson
Professor Nick Baker
| Reduction of Cogging Torque and EMF Harmonics in Modulated Pole Machines | 2016 |
|
Yang Yang
Professor Nick Baker
Professor Barrie Mecrow
| The assembly of a V shape in-wheel motor with reduced mechanical support | 2016 |
|
Dr Kia Kimiabeigi
Dr James Widmer
Professor Nick Baker
Dr Richard Martin
Professor Barrie Mecrow
et al. | Three-Dimensional Modelling of Demagnetization and Utilization of Poorer Magnet Materials for EV/HEV Applications | 2016 |
|
Yang Yang
Professor Barrie Mecrow
Professor Nick Baker
| Torque ripple reduction in fractional-slot concentrated-winding machines with saliency | 2016 |
|
Dr Jingzhuo Wang
Professor Nick Baker
| Comparison of flux switching and modulated pole linear machines for use with a free piston | 2015 |
|
Chris Spargo
Professor Barrie Mecrow
Dr James Widmer
Dr Christopher Morton
Professor Nick Baker
et al. | Design and Validation of a Synchronous Reluctance Motor with Single Tooth Windings | 2015 |
|
Sichao Yang
Professor Nick Baker
Professor Barrie Mecrow
Daniel Smith
Dr Glynn Atkinson
et al. | Magnet Losses and Demagnetisation in a Permanent Magnet In-wheel Electric Vehicle Traction Motor | 2015 |
|
Dr Nabeel Ahmed
Dr Jamie Washington
Glynn Atkinson
Professor Nick Baker
| Reduction of cogging torque and back EMF harmonics in modulated pole machine by variations in tooth span | 2015 |
|
Professor Nick Baker
Professor Edward Spooner
| 3D modelling of the generator for OpenHydro's tidal energy system | 2014 |
|
Professor Nick Baker
Professor Edward Spooner
| 3D modelling of the generator for openhydro's tidal energy system | 2014 |
|
Sichao Yang
Professor Nick Baker
Professor Barrie Mecrow
| Cost Reduction of a Permanent Magnet In Wheel Electric Vehicle Traction Motor | 2014 |
|
Glynn Atkinson
Professor Nick Baker
| Reduction of Cogging Torque and EMF Harmonics in Modulated Pole Machines | 2014 |
|
Dr Nabeel Ahmed
Dr Jamie Washington
Dr Glynn Atkinson
Professor Nick Baker
| Reduction of Cogging Torque and Torque Ripple in Modulated Pole Machines by Geometrical Changes | 2014 |
|
Dr Nabeel Ahmed
Dr Glynn Atkinson
Professor Nick Baker
| Flux Switching Modulated Pole Machine topologies which offer greater mechanical simplicity | 2013 |
|
Jamie Washington
Professor Nick Baker
| An improved torque density Modulated Pole Machine for low speed high torque applications | 2012 |
|
Professor Nick Baker
Glynn Atkinson
Jamie Washington
Professor Barrie Mecrow
| Design of High Torque Traction Motors for Automotive applications using modulated pole SMC machines | 2012 |
|
Jamie Washington
Dr Glynn Atkinson
Professor Nick Baker
Professor Alan Jack
Professor Barrie Mecrow
et al. | Three-Phase Modulated Pole Machine Topologies Utilizing Mutual Flux Paths | 2012 |
|
Jamie Washington
Glynn Atkinson
Professor Nick Baker
Professor Alan Jack
Professor Barrie Mecrow
et al. | Three-Phase Modulated Pole Machine Topologies Utilizing Mutual Flux Paths | 2012 |
|
Ching Ng
Professor Nick Baker
Dr Stephen McDonald
| Power conversion and control for a linear direct drive permanent magnet generator for wave energy | 2010 |
|
Professor Nick Baker
| Low-head low-cost hydro power by conversion to air pressure | 2007 |
|
Professor Nick Baker
| A transnational approach to the implementation of eco-design methodologies in SMEs | 2007 |
|
Dr Hendrik Polinder
Professor Nick Baker
| Current and novel electrical generator technology for wave energy converters | 2007 |
|
Professor Nick Baker
| Delivering eco design business support to SMEs on a transnational scale : benefits and learning outcomes | 2007 |
|
Professor Nick Baker
| Development of a linear test rig for electrical power take off from waves | 2007 |
|
Professor Nick Baker
| Estimation of the responses of axisymmetric bodies in spread irregular waves | 2007 |
|
Professor Nick Baker
| Absorption of energy from irregular waves by a buoyant, surging body | 2006 |
|
Professor Nick Baker
| Investigation of width on the point absorber effect for a surging collector | 2006 |
|
Professor Nick Baker
Dr Stephen McDonald
| Power Conversion and Control for a Low Speed, Permanent Magnet, Direct-Drive, Wave Energy Converter | 2006 |
|
Professor Nick Baker
| Comparison of power capture in irregular waves and their regular wave components | 2005 |
|
Professor Nick Baker
| Direct drive electrical power take-off for offshore marine energy converters | 2005 |
|
Professor Nick Baker
| Dynamic modeling of a linear vernier hybrid permanent magnet machine coupled to a wave energy emulator test rig | 2004 |
|
Professor Nick Baker
| Modelling the Performance of the Vernier Hybrid Machine | 2003 |
|
Professor Nick Baker
| A low speed reciprocating permanent magnet generator for direct drive wave energy converters | 2002 |
|
Professor Nick Baker
| Power Conversion in a low speed reciprocating electrical generator | 2002 |
|
Professor Nick Baker
| Design and integration of linear generators into direct drive wave energy converters | 2001 |
|
Professor Nick Baker
| Electrical Generators for Offshore Renewable Energy Applications | 2001 |
|
