Publications by Professor Alan Jack - ePrints

Browsing publications by Professor Alan Jack.

Newcastle Authors	Title	Year
Bogi Jensen Professor Alan Jack Dr Glynn Atkinson Professor Barrie Mecrow	Performance of a Folded-Strip Toroidally Wound Induction Machine	2012
Jamie Washington Dr Glynn Atkinson Professor Nick Baker Professor Alan Jack Professor Barrie Mecrow et al.	Three-Phase Modulated Pole Machine Topologies Utilizing Mutual Flux Paths	2012
Jamie Washington Glynn Atkinson Professor Nick Baker Professor Alan Jack Professor Barrie Mecrow et al.	Three-Phase Modulated Pole Machine Topologies Utilizing Mutual Flux Paths	2012
Dr Glynn Atkinson Professor Alan Jack	On the modeling of a TFPM by reluctance network including the saturation effect with emphasis on the leakage fluxes	2011
Dr John Bennett Professor Barrie Mecrow Professor Alan Jack Dr Dave Atkinson	A Prototype Electrical Actuator for Aircraft Flaps	2010
Professor Barrie Mecrow John Bennett Professor Alan Jack Dr Dave Atkinson	Drive topologies for solar-powered aircraft	2010
Dr Glynn Atkinson Dr John Bennett Professor Barrie Mecrow Dr Dave Atkinson Professor Alan Jack et al.	Fault tolerant drives for aerospace applications	2010
Dr Glynn Atkinson Professor Alan Jack	Flux Concentration at Pole Pieces	2010
Professor Alan Jack Dr Glynn Atkinson	Rotor for modulated pole machine	2010
Daniel Smith Professor Barrie Mecrow Dr Glynn Atkinson Professor Alan Jack Ali Mehna et al.	Shear stress concentrations in permanent magnet rotor sleeves	2010
Bogi Jensen Professor Alan Jack	Toroidally wound induction machines	2010
Professor Alan Jack Professor Barrie Mecrow Dr Glynn Atkinson	Current Developments in Soft Magnetic Composites for Electromagnetic Actuators	2009
Dr Glynn Atkinson Professor Alan Jack	Investigation of the Leakage Fluxes of SMC Made Magnetic Circuit Claw Pole TFPMs	2009
Dr Glynn Atkinson Professor Alan Jack Professor Barrie Mecrow	Multi-Phase Stator Device (Combined Phases)	2009
Dr Glynn Atkinson Professor Alan Jack Professor Barrie Mecrow	Multi-Phase Stator Device (Combined Phases) HB-707	2009
Dr Glynn Atkinson Professor Alan Jack Bogi Jensen	Soft magnetic composite in optimised machine design	2009
Professor Barrie Mecrow Professor Alan Jack	Efficiency trends in electric machines and drives	2008
Dr Glynn Atkinson Professor Alan Jack	Flux Concentration at Rotor Pole Pieces	2008
Dr George Kotsikos Dr Jack Hale Professor Alan Jack Professor Geoff Gibson	Mechanical and electrical engineering aspects of long-distance underground power transmission	2008
Dr Glynn Atkinson Professor Alan Jack	Permanent magnet rotor with flux concentrating polar pieces	2008
Robert Argile Professor Barrie Mecrow Dr Dave Atkinson Professor Alan Jack	Reliability analysis of fault tolerant drive topologies	2008
Robert Argile Professor Barrie Mecrow Dr Dave Atkinson Professor Alan Jack	Reliability Analysis of Fault Tolerant Motor Topologies	2008
Professor Barrie Mecrow John Bennett Professor Alan Jack Dr Dave Atkinson	Very High Efficiency Drives for Solar Powered Unmanned Aircraft	2008
Professor Alan Jack	Electrical Technology for Automotive Applications	2007
Andrew Causebrook Dr Dave Atkinson Professor Alan Jack	Fault ride-through of large wind farms using series dynamic braking resistors (March 2007)	2007
Zaid Al-Otaibi Professor Alan Jack	Spiral flexure springs in single phase linear-resonant motors	2007
Zaid Al-Otaibi Professor Alan Jack	Spiral flexure springs in single phase linear-resonant motors	2007
Professor Alan Jack	Advances in Machine Topologies and Construction Methods	2006
Dr Glynn Atkinson Professor Alan Jack	Development of Somaloy Components for a BLDC Motor in a Scroll Compressor Application	2006
Andrew Causebrook Dr Dave Atkinson Professor Alan Jack	Fault ride-through: Shifting the balance of power from blade pitch to electrical resistance	2006
Mark Leaver Professor Barrie Mecrow Professor Alan Jack Dr Andrew Steven Katie Austin et al.	High-Speed Drives for Mass Market Products	2006
Professor Alan Jack	Loss calculations for soft magnetic composites	2006
Zaid Al-Otaibi Professor Alan Jack	On the design of oscillating linear single phase permanent magnet motors	2006
Zaid Al-Otaibi Professor Alan Jack	On the design of oscillating linear single phase permanent magnet motors	2006
Ulrike Hoefer Professor Alan Jack	Predicting and Preventing Demagnetisation in Permanent Magnet Motor Drives	2006
Manas Khatre Professor Alan Jack	Simulation of PMSM VSI drive for determination of the size limits of the dc-link capacitor of aircraft control surface actuator drives	2006
Dr Glynn Atkinson Professor Barrie Mecrow Professor Alan Jack Dr Dave Atkinson	The analysis of losses in high-power fault-tolerant machines for aerospace applications	2006
Dr Glynn Atkinson Professor Barrie Mecrow Professor Alan Jack Dr Dave Atkinson	The Design of Fault Tolerant Machines for Aerospace Applications	2005
Dr John Bennett Professor Barrie Mecrow Professor Alan Jack Dr Dave Atkinson	A prototype electrical actuator for aircraft flaps and slats	2005
Professor Alan Jack Professor Barrie Mecrow Phillip Dickinson	Axial Flux Motors Using Compacted Insulated Iron Powder and Laminations - Design and Test Results	2005
Professor Alan Jack Professor Barrie Mecrow	Axial flux motors using compacted insulated iron powder and laminations -design and test results	2005
Dr Hendrik Polinder Professor Barrie Mecrow Professor Alan Jack Phillip Dickinson	Conventional and TFPM linear generators for direct-drive wave energy conversion	2005
Ross Hall Professor Alan Jack Professor Barrie Mecrow	Design and initial testing of an outer rotating segmented rotor switched reluctance machine for an aero-engine shaft-line-embedded starter/generator	2005
Professor Alan Jack	Design Concepts for Electric Motors using Soft Magnetic Composites	2005
Dr Dave Atkinson Professor Alan Jack Dr Matthew Armstrong	Development of a high bandwidth multi-phase multilevel power supply for electricity supply network emulation	2005
Graham Pannell Dr Dave Atkinson Professor Alan Jack	Dynamic model of DFIG control performance under fault conditions for offshore wind applications	2005
Professor Barrie Mecrow Professor Alan Jack	Efficiency trends in electric machines and drives	2005
Dr Matthew Armstrong Dr Dave Atkinson Professor Alan Jack Stephen Turner	Power system emulation using a real time, 145kW, virtual power system	2005
Professor Alan Jack	Soft Magnetic Composites – Motor Design Issues and Applications	2005
Dr Glynn Atkinson Professor Barrie Mecrow Professor Alan Jack Dr Dave Atkinson	The design of fault tolerant machines for aerospace applications	2005
Dr Matthew Armstrong Dr Dave Atkinson Professor Alan Jack Stephen Turner	Unique virtual power system technology used in a low power network to provide solution testing for distributed generation	2005
Dr Matthew Armstrong Dr Dave Atkinson Professor Alan Jack Stephen Turner	Unique virtual power system technology used in a low power network to provide solution testing for distributed generation	2005
Professor Alan Jack	18th Ewing Lecture: Advances in Electric Machines: Topology, Materials and Construction	2004
Dr John Bennett Professor Barrie Mecrow Professor Alan Jack Dr Dave Atkinson	Choice of drive topologies for electrical actuation of aircraft flaps and slats	2004
Dr John Bennett Professor Barrie Mecrow Professor Alan Jack Dr Dave Atkinson	Choice of drive topologies for electrical actuation of aircraft flaps and slats	2004
Professor Barrie Mecrow Professor Alan Jack Dr Dave Atkinson Simon Green Dr Glynn Atkinson et al.	Design and testing of a four-phase fault-tolerant permanent-magnet machine for an engine fuel pump	2004
Dr Ian Gilbert Professor Steve Bull Professor Alan Jack Dawn Stephenson Dr Alten De Sa et al.	Effects of processing upon the properties of soft magnetic composites for low loss applications	2004
Professor Barrie Mecrow Professor Alan Jack	Elektrische Maschine	2004
Dr John Bennett Professor Alan Jack Professor Barrie Mecrow Dr Dave Atkinson	Fault-tolerant control architecture for an electrical actuator	2004
Dr John Bennett Professor Alan Jack Professor Barrie Mecrow Dr Dave Atkinson	Fault-tolerant control architecture for an electrical actuator	2004
Dr John Bennett Professor Alan Jack	Fault-tolerant control architecture for an electrical actuator	2004
Professor Alan Jack	Loss calculations for soft magnetic composites	2004
Professor Alan Jack Professor Barrie Mecrow	Low cost SMC brushless DC motors for high volume applications in the automotive sector	2004
Professor Barrie Mecrow Eyhab El-Kharashi Emeritus Professor John Finch Professor Alan Jack	Preliminary performance evaluation of switched reluctance motors with segmental rotors	2004
Professor Barrie Mecrow Professor Alan Jack Ulrike Hoefer Phillip Dickinson	Simplifying the manufacturing process for electrical machines	2004
Professor Alan Jack	Soft magnetic composites - motor design issues and applications	2004
Professor Alan Jack	Soft Magnetic Composites and their Use in Electrical Machines	2004
Professor Alan Jack Phillip Dickinson	Stator core for linear motor	2004
Professor Alan Jack	Stator of an electrical machine	2004
Professor Barrie Mecrow Professor Alan Jack Dr Dave Atkinson Brian Green	The influence of stator design on the performance of fault tolerant machines	2004
Professor Barrie Mecrow Professor Alan Jack Dr Dave Atkinson Simon Green Glynn Atkinson et al.	Design and testing of a 4 phase fault tolerant permanent magnet machine for an engine fuel pump	2003
Simon Green Dr Dave Atkinson Professor Barrie Mecrow Professor Alan Jack Brian Green et al.	Fault tolerant, variable frequency, unity power factor converters for safety critical PM drives	2003
Dr Hendrik Polinder Professor Barrie Mecrow Professor Alan Jack Phillip Dickinson	Linear generators for direct-drive wave energy conversion	2003
Professor Barrie Mecrow Eyhab El-Kharashi Emeritus Professor John Finch Professor Alan Jack	Performance evaluation of switched reluctance motors with segmental rotors	2003
Professor Alan Jack	Recent Developments in Motors and Drives for Domestic Applications	2003
Professor Barrie Mecrow Eyhab El-Kharashi Emeritus Professor John Finch Professor Alan Jack	Segmental rotor switched reluctance motors with single-tooth windings	2003
Dr Dave Atkinson Professor Alan Jack Professor Barrie Mecrow	Sensorless operation of a fault tolerant PM drive	2003
Professor Alan Jack	Soft magnetic composites-materials and applications	2003
Professor Alan Jack	The SMC Technology – from idea to reality	2003
Professor Alan Jack Professor Barrie Mecrow	Alternate designs of low cost brushless-DC motors using soft magnetic composites	2002
Dr Ian Gilbert Professor Steve Bull Emeritus Professor Terry Evans Professor Alan Jack	Development of soft magnetic composites for low-loss applications	2002
Dr Dave Atkinson Dr Chris French Professor Alan Jack	Electrical Power Test Facilities for the New and Renewable Energy Centre	2002
Professor Barrie Mecrow Professor Alan Jack Dr Dave Atkinson Phillip Dickinson	High torque machines for power hand tool applications	2002
Professor Barrie Mecrow Professor Alan Jack Dr Dave Atkinson Phillip Dickinson	High torque machines for power hand tool applications	2002
Phillip Dickinson Professor Alan Jack Professor Barrie Mecrow	Improved permanent magnet machines with claw pole armatures	2002
Professor Alan Jack	Magnetic Assessment of SMC materials	2002
Professor Barrie Mecrow Emeritus Professor John Finch Eyhab El-Kharashi Professor Alan Jack	Switched reluctance motors with segmental rotors	2002
Professor Barrie Mecrow Emeritus Professor John Finch Eyhab El-Kharashi Professor Alan Jack	The design of switched reluctance motors with segmental rotors	2002
Professor Alan Jack	The SMC Technology – from concept to reality	2002
Professor Alan Jack Professor Barrie Mecrow Phillip Dickinson	A stator for an electrical machine	2001
Professor Alan Jack	Iron powder in electrical machines, possibilities and limitations	2001
Professor Alan Jack	Iron Powder in Electrical Machines, Possibilities and Limitations	2001
Professor Barrie Mecrow Professor Alan Jack	Power Tool	2001
Professor Paul Acarnley Professor Alan Jack Professor Barrie Mecrow	Starting of single-phase cageless synchronous motors	2001
Professor Alan Jack Professor Barrie Mecrow	Design and testing of a universal motor using a soft magnetic composite stator	2000
Professor Alan Jack Professor Barrie Mecrow Phillip Dickinson Dawn Stephenson	Permanent-magnet machines with powdered iron cores and prepressed windings	2000
Professor Alan Jack Professor Barrie Mecrow Christian Weiner	Switched reluctance and permanent magnet motors suitable for vehicle drives - A comparison	2000
Professor Larbi Refoufi Professor Alan Jack	Analysis and modeling of the steady state behavior of the static Kramer induction generator	1999
Professor Alan Jack Professor Barrie Mecrow Christopher Maddison	Combined radial and axial permanent magnet motors using soft magnetic composites	1999
Professor Barrie Mecrow Professor Alan Jack Dr Dave Atkinson	Operation of fault tolerant machines with winding failures	1999
Professor Alan Jack Professor Barrie Mecrow Phillip Dickinson Dawn Stephenson Emeritus Professor James Burdess et al.	Permanent magnet machines with powdered iron cores and pre-pressed windings	1999
Dr Dave Atkinson Professor Alan Jack	Real-time emulation for power equipment development. Part 2: The virtual machine	1998